fineness of your ground coffee, according to the type of
coffee you use and your taste.
- The Espresso coffee require finely ground coffee (to
retain the passage of liquid), while the coffee drip coffee
need thicker.
- On the first use, you are advised to select an interme-
diate position according to your type of coffee maker and
then later adjust the degree of fineness to your taste.
Once you have used the appliance a few times, you’ll
find the ideal grind to suit you.
- Set the ground coffee fineness by adjusting the grind
setting selector (6) to the desired level.
- To select the finest ground size, turn the knob regulator
(6) anticlockwise.
- To select more coarsely ground size, turn the knob
regulator (6) clockwise.
WARNING:
Do not adjust the grind setting while the grinder is
working. If you turn the grind selection knob while the
grinder is working, the motor of the grinder may jam.
Selector of quantity to grind:
Use the quantity selector (5) to program the amount of
ground coffee you want.
The more cups you set, the longer the appliance will run.
Practical hints
Keep your coffee beans in the refrigerator in a sealed
container.
To keep your coffee’s entire aroma, we advise you to
grind your coffee just a few moments before making it.
Once you have finished using the appliance:
- Unplug the appliance from the mains.
- Clean the appliance.
Housing for the Cable
- This device has a housing for the supply cord, located
at the rear (12).
Cleaning
- Disconnect the appliance from the mains before under-
taking any cleaning task.
- Never submerge the appliance in water or any other
liquid or place it under running water.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning the
appliance.
- Clean the lids and ground coffee holder in warm,
soapy water (or place them in the upper basket of your
dishwasher.
- To remove the removable upper mill (2), set the grind
selector (6) to the minimum position, then take hold of
the side flaps of the upper mill with your fingers and turn
clockwise, then raise it vertically to remove (Fig. A)
- Carefully clean inside of the bean hopper (3) using a
damp cloth.
- To replace the upper mill, set the grind selector (6) to
the maximum position, position the removable upper mill
and turn it round in the anticlockwise direction (Fig. B).
- Carefully clean the ground coffee dispenser and the
body of the appliance, using a damp cloth.
- Regular cleaning and proper maintenance ensure
optimal results and a long life for the appliance.
Anomalies and repair
- Take the appliance to an authorised technical support
service if product is damaged or other problems arise.
Do not attempt to disassemble or repair the appliance
yourself as this may be dangerous.
If you detect any anomalies, refer to the following table:
The appliance
does not operate
or stops during
operation
Check the electrical connection
The bean hopper or its lid are not
positioned correctly or not fitted
The ground coffee container or its
cover is not correctly positioned or
is not set
The grind se-
lector no longer
works
Check that the upper mill is co-
rrectly positioned (see paragraph
on Maintenance in the User’s ma-
nual)
For EU product versions and/or in case that it is reques-
ted in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance
consists are included in a collection, classification and
recycling system. Should you wish to dispose of them,
use the appropriate public recycling bins for each type
of material.
- The product does not contain concentrations of
substances that could be considered harmful to the
environment.
This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for
the selective collection of Waste from Electric
and Electronic Equipment (WEEE).
This appliance complies with Directive 2006/95/EC on
Low Voltage, Directive 2004/108/EC on Electromag-
netic Compatibility and Directive 2011/65/EU on the
restrictions of the use of certain hazardous substances in
electrical and electronic equipment.
Manual Minimoka GR0278.indb 12
27/7/15 16:44
