3.6.6
The selected file will be installed in the attenuator; the process
will take up to a
minute.
Figure 3.6.6: Firmware - Progress Bar Window
Attempting to start a second GUI session while the firmware is being updated may cause
the firmware to be corrupted. It is therefore recommended not to attempt to start any
additional GUI sessions until after the firmware upgrade has been completed.
3.6.7
After the firmware has updated
an alert will appear. Click ‘OK’ to shut down the
Programmable Attenuator program and then restart it normally.
Figure 3.6.7: Firmware - Successful Update
CAUTION
Page 30 of 31
AN-49-005 Rev.:
D
(August 7, 2016) M156027 (R90553) File: AN-49-005(D).doc
This document and its contents are the property of Mini-Circuits
