Figure 3.1.6: Ethernet IP search window
Notes:
1) To refresh the list of units found click on the Search button.
2) The search function uses ports UDP 4950 and UDP 4951 for communication, ensure
your firewall allows access to these ports.
3.1.8
After entering the IP address
enter your password if you set one (see
section
3.2
), select the communication protocol you wish to use (HTTP or Telnet) and click start, the
Attenuation control screen will open.
Figure 3.1.8: Ethernet startup screen
Note:
changing Ethernet settings is only possible via USB control, see section 3.2 for details.
3.1.9
Telnet or HTTP text commands
can
also be used to control the attenuator. Just
type the command in the address field of your internet browser or implement a Get/Post HTTP
function in your selected application (for HTTP), or establish a Telnet connection. A full list of
the possible commands and queries is available in Mini-Circuits Programming handbook, and in
a text file on the CD provided with the Attenuator, in the Ethernet directory.
Page 18 of 31
AN-49-005 Rev.:
D
(August 7, 2016) M156027 (R90553) File: AN-49-005(D).doc
This document and its contents are the property of Mini-Circuits