MiNGARDi Micro One 230, Use And Installation Manual

Page: 7 / 17

GB
INSTRUCTIONS ON FITTING, USING AND
MAINTAINING THE ACTUATOR
Micro One
Before embarking on any installation or wiring
operations, read this manual extremely
carefully.
The user must refer to the notes contained in it
and keep it safely for future reference.
EXPLANATION OF THE SYMBOLS
Danger!
General danger or precautionary
warning with numerous implications.
Warning!
Read this manual carefully.
Danger!
Danger of electric shock.
Danger!
Danger that could cause personal injury.
Danger!
Danger of hands being crushed.
Warning!
Draws attention to instructions that must
be followed in order to prevent damage
to the actuator.
Notice
Indicates important notices to which
great attention must be paid.
NOTES ON THE ACTUATOR
The Micro One complies with the
current safety standards.
Operating safety can be guaranteed
only if installers comply with the safety
regulations in force in the country where the
actuator is used.
The Micro One actuator is designed exclusively to
open and close top hung windows and hopper-frame
windows and is designed only for indoor use. It is
forbidden to install two or more actuators on the
same window without using a synchronisation
accessory. Any other application of the actuator must
be approved by Mingardi S.r.l. after technical testing
of the application.
Use only original accessories or accessories
approved by Mingardi S.r.l. to install the actuator.
IMPORTANT SAFETY REGULATIONS
Warning!
Read this manual carefully.
Warning!
In order to ensure personal safety,
strictly comply with the regulations that
are set out below.
USE AND MAINTENANCE
When using the Micro One actuator, follow these
safety regulations:
Do not allow children to play with the
remote controls;
Observe the moving parts closely and
allow neither adults nor children to
approach until the moving parts have
come to a complete stop;
At least once a year, check that the
power cable has not been damaged and
that it shows no sign of wear;
Check that no object obstructs the
window movement;
If faults arise, never work on the actuator
and never open or dismantle parts of the
actuator that deny access to the inside of the
mechanism.
If the actuator fails to function or is damaged,
contact service engineers;
Do not use the actuator until it has been repaired.
INSTALLATION
Only qualified installers can carry out
installation.
The Micro One actuator must be assembled
and wired up only by specialised staff who
have been properly trained and who are
familiar with the problems connected with
automatic window opening and closing
systems, technical reference standards and
safety standards.
Warning!
Incorrect installation may make the
actuator dangerous! Follow all the
instructions set out below.