Minebea CSA-507C, Instruction Manual

Page: 17 / 50

5
4 − 2. Note on connections

Warning
●
Keep strictly to the following items in the connection with the
instrument. If neglected, it may cause an unexpected faulty or a
damage in the instrument.
D Turn the power supply OFF when connection is made.
D Since the terminals at the front side of the instrument is made of resin, take care not to
drop it down nor apply strong impact.
D Recommended torque to tighten the terminal screws for terminals is 0.8 N
･
m at maximum.
D The crimp − type terminal lugs for the terminals of the instrument are to be applied as
follows
：
Width of crimp − type terminal lugs Suitable crimp − type terminal lugs
6.0 mm or less 1.25 − 3 or Y type 1.25 − 3.5
D Keep the connecting cable with the instrument away from the noise source like power
supply line and I/O line for control as far as possible.
D Conduit wiring should be the type of exclusive one, and avoid using with another line
together.
D All of the connections should be executed securely according to the Instruction manual.