Minebea Intec IFXS4, Installation Instructions And Safety Information

Page: 8 / 104

8 Bedienungsanleitung IUXS4
Bedienungsanleitung IUXS4 9
Transporting the IFXS4...
(Option T7)
§ Remove the drive-on ramp from
the front of the scale.
§ Make sure there is no load on the
scale.
$ Make sure to observe the safety
instructions.
§ Remove the threaded caps from the
four threaded fasteners and save
them in a safe place.
$ Lubricate the threaded fasteners
regularly, so that the caps can
be removed and the hand cranks
attached at any time without
difficulty.
§ Attach the two hand cranks to the
two threaded fasteners at the front
of the scale.
§ Turn the cranks clockwise to lower
the transport rollers.
$ Repeat this procedure for the two
rear rollers.
Important:
Make sure there is no load on the
platform before you move it.
§
The scale can now be pushed
into the desired position
(rate of speed: <1m/s).
Please observe the safety
instructions.
§
If available, fasten the towing bar
(optional) as shown.
$
The scale can now be pulled
into the desired position (rate of
speed: <1 m/s).
Please observe the safety
instructions.
$
This procedure is useful, for
example, for cleaning the surface
beneath the scale at the place of
installation.
§
Return the weighing platform
to the place of installation and
retract the rollers.
§
Remove the hand crank.
§
Replace the four threaded caps.
§
Fasten the drive-on ramp to the
front of the scale.
$
Make sure to observe the safety
instructions.
Connecting the IUXS... or IFXS...
Connecting Cable: IUXS.. or IFXS.. to Indicator
No.: EX Cable: type A or Cable: type B
V + (Supply v) 1 (white) or blue
V – (Supply voltage –) 3 (brown) or black/brown
(Output ) 5 (green) or white
Signal – (Output signal –) 6 (yellow) or red/pink
Sense + () 2 (pink) or green
Sense – (Shield –) 4 (gray) or gray
Ground (Shield)