— RESULT
Accumulated result is printed
— ALL
Result and statistical parameters like Min, Max,
...
— PROD.ID
Product storage number
— OFF
disabled*
— ON
enabled
— PROD.NA
Product name; 12 alpha-numeric characters at
maximum
— OFF
disabled*
— ON
enabled
— SERNO
serial number of the active (displayed) scale
Example: W1 38457989 or W2 38457989
— OFF
disabled*
— ON
enabled
— LI.SET
List Set
— FORMAT
Format send to printer and to PC
— MULTI
Multi-line (single column) printout*
— SINGLE
Single line printout; whole content defined
above is printed in one line
— FEED
Paper Feed Setting
— LINE
Move a paper up one line after printing
— 4LF
Move a paper up four lines after printing*
— FORM
Form feed after printing
— END
— PROD.LI
Print whole product storage
— NO
disabled*
— YES
print all products.
This is done in that moment when YES is
selected.
Then all products are printed. Afterwards NO is
set automatically!
— RESET
Factory setting
— NO
not restored*
— YES
enabled
— END
Leave menu level
— BAUD
Baud Rate
— 2400
2400
— 4800
4800
— 9600
9600*
— 19200
19200
— 38400
38400
— 57600
57600
— 115200
115200
— PARITY
Parity
"Without stability" means here weight values with or without stability.
"With stability" means here only weigh values with stability!
7.4.5
Menu Selection [PRN.COM]
Enter this menu to setup Print Communication parameters.
Default settings are identified by an "*"
PRN.COM
7 Menu Settings
Compact Scale Puro® Count
Minebea Intec
EN-51
