Piece Weight
blinking weight value of Low Limit if
checkweighing was initialized. Show unit used before activating this change process.
Piece Weight
Blinking number of pieces if Checkcount was
initialized.
Count
The Low Limit can be entered via key pad or scanner.
Pressing the
Button long, the unit will change between a weight unit used
before this change process and unit pcs if the product wasn’t initialized before (=
empty product). This selection is also used in point
④
(Set high limit).
The value is taken over by pressing the
(Yes) Button briefly. Go on point
④
.
Pressing the
(Back) Button go back to point
②
.
-
④
It is shown on
Weight
Piece Weight
blinking weight value of High Limit if
checkweighing was initialized. Show unit used before activating this change process.
Piece Weight
Blinking number of pieces if Checkcount was
initialized.
Count
The High Limit can be entered via key pad or scanner.
6 Application Programs
Compact Scale Puro® Count
Minebea Intec
EN-39
