Weight
Piece Weight
During this state Display-Weight shows [A.PRINT], Display-PW shows [INTER] and
Display-Count shows the number of seconds which can be entered via the keypad or a
scanner.
6.7.2.4
Running Mode: CONTNT
Each selected element in [PRINT] - [CONTNT] is printed except the functionalities like
TOTALIZATION if it isn’t activated in menu and Preset Tare when it is empty.
The elements are printed with or without stability as fast as possible.
6.7.2.5
Running Mode: ACCEPT
An automatic print is only generated when one application of "Checkweighing" is
activated AND the weight on the pan or the removed weight is within the defined limits.
This automatic print is generated
after
the weight is accumulated in TOTALIZATION with
AUTO-Mode.
Each selected element in [PRINT] - [CONTNT] is printed except the functionality like
TOTALIZATION if it isn’t activated in menu.
6.8
Product Memory
The device has a product memory which contains 30 products at maximum.
Each product contains at minimum:
-
Product ID (memory number)
-
Product Name = 12 ASCII character long. Via scanner alpha characters are possible!
-
Preset Tare value
-
Piece Weight
-
Checkweighing Low Limit = a weight value or a number of pieces.
-
Checkweighing High Limit = a weight value or a number of pieces.
If a Checkweighing limit is unequal to zero then the application Checkweighing is
activated. Or if these limits are equal zero then the application Checkweighing is
deactivated.
Example: Checkweighing is active. If a product is activated which contains only counting
parameters then Checkweighing is set to [OFF] (is deactivated).
If the
Button is pressed briefly and the user wants to end this state (storing or
loading) this is done by pressing the
(Exit) Button briefly.
If there are two scales defined in menu then the product can be loaded even the scales
have different accuracies. This is the responsibility of the customer.
Contents of Product Id and Product Name are printed when no product is loaded or the
product settings were changed or the whole product memory is empty.
6.8.1
Storing Product Data
Requirement for storing: Application is already initialized.
Compact Scale Puro® Count
6 Application Programs
EN-34
Minebea Intec
