Mindray Zonare ZS3, Instructions For Use Manual

Page: 68 / 165

ZS3 Instructions for Use 60 | P a g e
Measurement
Tools
Function
PSV
Measures the Peak Systolic Velocity of a waveform; the highest velocity of red blood
cells crossing the sample volume.
EDV
Measures the End Diastolic Velocity of a waveform; the blood velocity at the end of
the cardiac cycle.
PS/ED
Velocity and PG between two peaks on the Doppler spectrum are measured to
calculate the PS/ED (peak systolic/end diastolic).
Diast1/Diast2,
PSV1/PSV2
Velocity between two points on the Doppler spectrum are measured to calculate
Ratio
VTI Measures Velocity Time Integral of a Doppler Waveform
Peak Gradient Measures the peak pressure gradient of the traced Doppler waveform.
Mean Gradient Measures the mean pressure gradient of the traced Doppler waveform.
½ time Measure pressure half time of a Doppler waveform.
Slope Measures the distance and time between two points and calculates the slope.
Volume Flow Measures the blood flow through a vascular cross section per unit time.
MV Slope
Under the cardiac exam mode, you can select the MV Slope to measure the MV E
Vel, MV E Grad, MV Area (PHT), MV DecT, and MV PHT items.
Auto-Trace
There are multiple ways of invoking Auto-Trace. Any of the following may be used:
•
A function key can be configured for Auto-Trace in Setup / Keys.
•
Double-clicking on the Caliper button while Doppler is active.
•
Selecting Auto-Trace from the Softkey OLED controls (while Auto-Trace is active, a
Volume Flow OLED will also be available for easy access).
Once Auto-Trace is active the onscreen results box will automatically update data based on the
spectral display. Users may select which measurements are included in the results box by
exam type using
Setup / System / Application / Auto-Trace
The interval size, and envelope type can be configured in Setup / System / Application /
Auto- Trace or by adjusting the OLEDs assigned to the functions when Auto-Trace is active.