d. Replace flexible cover (from bottom of SpO
2
module) over connection site on bottom of
Panorama Telepack
e. Turn Panorama Telepack on by rotating the battery
door clockwise to continue ECG monitoring
f. Replace cleaning plug over connection site on
inside of SpO
2
module
Cleaning the SpO
2
Module:
To clean the SpO
2
module:
a. Place cleaning plug on the connector located in the
inside of the SpO
2
module
b. Press down on the cleaning plug while angling the
top of arm of the plug into the circular recess
c. Refer to Panorama Central Station Operator manual
for approved cleaning solutions
Frequently Asked Questions
The
SpO
2
module appears connected but the
SpO
2
digital data is not being displayed. What could be the
issue?
a. SpO
2
module attached with the Panorama
Telepack on
• Turn off the Panorama Telepack, attach the
SpO
2
module, and turn on to “initialize” the
SpO
2
module
7
P/N: 0077-00-0003-01 Rev B
Panorama
®
Telepack-608 SpO
2
Quick Reference Guide
Panorama_Telepk QRG_0003_rB.indd 11
3/18/10 3:13:37 PM
