Mindray DP-8300, Operator'S Manual

Page: 73 / 101

„ B/THI Map
1. Click [B Map]/[ THI Map] to open the “Effect” dialog box.
2. Select the grey map to be configured.
3. Configure the “Grey Curve”, “Grey Rejection” and “
γ ” (please refer to “4.2.13 B/M Post
Process” for details), or click “Record Current” to record the current parameters as preset.
4. Click [OK] to confirm or click [Cancel] to cancel.
„
B/THI IP/M IP
1. Click [B IP]/[THI IP] to open the “B IP”/“THI IP”/“M IP” dialog box.
2. Configure the parameters of “Dyn Rng (Dynamic Range)”, “Img Enhance (Image
Enhance)” and “Frame Avg (Frame Average)” (for B/THI IP) or “Dyn Rng (Dynamic
Range)” and “M Soften” (for M IP) in the corresponding drop-down list.
3. Click [OK] to confirm or click [Cancel] to cancel.
„ Record Current: Record the current parameters as preset.
„ Load Factory: Restore all parameters in this page to factory default.
8.5
8.5.1
Measure Preset
Measure
This system provides a measurement library, including Measurement, Calculate and Study items of
General, Abdomen, Gynecology, Cardiac, Vascular, Urology, Small Parts, ORTH and Obstetric.
„ To configure the measurement package
1. Select an exam mode.
2. Input the name of the measurement package. To manage the measurement package,
click [Advanced].
3. Select a scan mode. If “Use same menu for all scan mode” is selected, you need not to
select the scanning mode.
4. Select the type of the measurement item.
5. Add/delete items for measurement package:
h [>]: Select an item in “Available Items”, and click [>] to add it to “Selected Items”;
h [>>]: Click [>>] to add all items in the “Available Items” to the “Selected Items”;
h [<]: Select an item in “Selected Items”, and click [<] to delete it;
h [<<]: Click [<<] to delete all items in “Selected Items”;
h Sort: Select an item in “Selected Items”, and then click [Move Up] or [Move Down] to
move it up/down.
h
[Default]: Select an item in “Selected Items”, and click [Default] to set it as default
measurement items.
6. To set the measure sequence of the measurement package:
h None: After the measurement, the cursor returns to the measurement menu;
h Repeat: After the measurement, the system automatically activates the current item
again;
h Next: After the measurement, the system automatically activates the next item in the
menu.
„ To manage the measurement package: Click [Advanced] to manage the measurement
package.
z
[>]: Select a package in “Available Items”, and click [>] to add it to “Selected Items”;
z [>>]: Click [>>] to add all packages in the “Available Items” to the “Selected Items”;
Preset 8-9