Mindray DP-8300, Operator'S Manual

Page: 67 / 101

8.2.2 General
Sub-page Item Type Description
Patient
Info
Info displays in
image banner
Check box
To select the items to be displayed in the
patient information area.
H&W Unit Radio button To select the unit: Metric/English.
Surface Formula Radio button
To select the formula of surface area:
Orient/West.
Image
Format
JPG Compress Drop-down list
To select the compression ratio of JPG
format: Low/Middle/High.
Single Frame
Format
Drop-down list
To select the format of single-frame files:
FRM/JPG/BMP/DCM (DCM is available only
when DICOM is installed).
Multi Frame Format Drop-down list
To select the format of multi-frame files:
CIN/AVI/DCM (DCM is available only when
DICOM is installed).
System
Dormancy
Switch of dormancy Check box To turn On/Off dormancy.
Wait Time Number
This item can be configured after dormancy is
turn on. Click “
▲ ” to increase the value and
click “ ▼ ” to decrease the value. The range is:
5-60 minutes and the step length is 1 minute.
ABC
Font Size Radio button
To set the size of comments:
Small/Middle/Big.
Arrow Size Radio button To set the size of arrows: Small/Middle/Big.
Video
export
format
Video export format Radio button
To select the format of video output:
PAL/NTSC.
Paper Size Drop-down list
To set the paper size of graph/text printer: A4,
B5, Letter, Unknown.
/ Load Factory Button
Reset all parameters to factory default in this
page.
8.2.3 Image Preset
Sub-page Item Type Description
Reset
Config
Probe Drop-down list
To set the model of default transducer
displayed when no transducer is connected.
Exam Mode Drop-down list
To set the default exam mode after system
starts.
Reload Preset on
New Patient
Check box
To set whether to adopt the default image
parameters or not when beginning a new
exam: Checked (to adopt default image
parameters)/Unchecked (to continue with
current image parameters)
Preset 8-3