manualshive.com logo in svg

Mindray DP-8300, Operator'S Manual

Share
Download
Mindray DP-8300 Operator'S Manual Download Page 56

5-2 Annotating the Image 

h

 

Press <Set> to add the selected comment and end adding comments. The cursor 
moves to the end of the comments. 

„

  Add comments from comments library (select word in the menu) 

1.  Move cursor to where you want to add comments. Press <Set> to set the initial position. 

You can also move the comment later. If initial position is not set, the comments will be 
added to behind the last editing position. 

2.  Press <Menu> to open the comment menu. 
3.  Select a comment in the menu and press <Set> to activate it and move it to the initial 

position. 

4.  Move the comment with the track ball. 
5.  Press <Set> to confirm. 

5.1.2 Adding 

Arrow 

1.  Move cursor to where you want to add arrow. You can also move the arrow later. 
2.  The “Rotation” indicator of <Multifunctional Knob> lights up. Rotate the <Multifunctional 

Knob> to change the direction of the arrow by 15 degrees.   

3.  Press <Set> to confirm and continue adding arrow or press <Back> to delete the last 

arrow. Press <Comment> to exit arrow mode. 

5.1.3 Moving 

Comments/Arrows 

1.  Move cursor to the comment/arrow that you want to move, and the cursor changes to “ ”.  
2.  Press <Set> to select the comment/arrow and the cursor changes to the frame of the 

comment/arrow. 

3.  Move the frame of the comment/arrow to a new position with the track ball.   
4.  Press <Set> to confirm. 

5.1.4 Editing 

Comments 

1.  Move cursor to the comment to be edited, and press <Set> twice to enter comment editing 

status.  

2.  Move cursor to the editing position with the direction buttons. Press <DEL> to delete the 

character on the left of the cursor. 

3.  Press <Set> to confirm and exit or press <Back> to cancel and delete the current 

comment. 

5.1.5 Deleting 

Comments/Arrows 

1.  Move cursor to the desired comment/arrow and the cursor turns to “ ”. Press <Set> to 

select the comment/arrow. 

2.  Press <Back> or <Del> to delete the comment/arrow. 

5.2 Body 

Mark 

Body mark indicates the posture of patients and orientation of transducer during ultrasonic exam. It 
is an additional remark to the ultrasonic image. 

Summary of Contents for DP-8300






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands