![background image](http://html.mh-extra.com/html/mindplace/procyon-avs/procyon-avs_user-manual_1800746008.webp)
8
Step 2: Connect the GanzFrames and headphones
•
Plug the GanzFrames gently into the top of the console. No-
tice that the plug fits in only one way.
•
Plug the headphones into the correct jack on the right side of
the unit.
Step 3: Select and run a session
•
Turn the unit ON by pressing the on/off button. The LED
display will briefly flash the word "on" and then show 000. This is
the "random" session.
•
Press the Up/Down key to select a session. See pages 18-22
for a description of internal factory sessions. While holding the key
the session number will initially advance slowly, then accelerate
(like setting a clock radio). To cause the session number to decre-
ment, press the Up/Down and Start/Stop button at the same time.
•
Press the Start/Stop button once to start a session. The dis-
play will briefly flash the word "run", then display the session num-
ber again.
•
Use the dials at the top of the unit to adjust the audio volume
and light brightness. We recommend starting at low settings and
gradually increasing them to optimum levels.
•
To stop the session, press the Start/Stop button once. The
display will flash "End" one time, then the session number.
CAUTION: Do not open your eyes while wearing the Gan-
zFrames
. The LEDs are very bright! Do not start a session at
high brightness levels unless you are certain that you will find it
comfortable
.
Summary of Contents for Procyon AVS
Page 1: ......