![background image](http://html.mh-extra.com/html/mindplace/procyon-avs/procyon-avs_user-manual_1800746011.webp)
11
The MIDDLE button is for selecting a
mode
(see page 13
)
. When
you turn the system on it automatically sets itself to SESSION
mode, which displays a three digit session number. Each time you
press it, it steps to the next mode, displaying the following se-
quence:
Session (SES) > PC > dL1 > dL2 > dAS > AS > SES.
The BOTTOM button is for selecting a specific session, while in
Session mode (the display shows three digits).
The ON/OFF button is located on the upper part of the right side
of the console.
There are two dials on top of the console. The LEFT one is AU-
DIO VOLUME, and the RIGHT one is LIGHT BRIGHTNESS.
The audio volume affects only internal audio, not external audio;
use your CD/MP3 player's volume control to set the proper bal-
ance between the two.
We recommend that you set the dials to a low level before starting
your session, and increase them slowly until you find the most
comfortable setting.
There are four connectors on the Procyon
:
On the TOP of the unit is the GanzFrame connector. Note that
this socket is keyed to fit in only one way with the GanzFrames
plug. Like all miniature connectors, it is somewhat delicate; do not
attempt to force the GanzFrame plug into it. If it doesn't seem to
fit in one orientation, flip it over and plug it in the other way.
On the RIGHT SIDE of the console, just below the start/stop
button is the USB jack. Use the included (or any standard to mini
USB) cable to attach it to your PC (but do not do so until you have
installed the Procyon driver and software). This connector is also
used to communicate with the PreSage biofeedback system using a
Summary of Contents for Procyon AVS
Page 1: ......