9
Do not connect this equipment with power applied. Failure to heed
this directive may result in fire or serious injury.
Minarik strongly recommends the installation of a master power
switch in the voltage input line, as shown in Figure 5 (page 13). The
switch contacts should be rated at a minimum of 200% of motor
nameplate current and 250 volts.
Warning
m
XP-AC-SL series connections
Connect the power input leads, an external line fuse and a DC motor as shown in
Figure 4 (page 11).
Motor
Minarik drives supply voltage from A1 and A2 terminals. It is assumed throughout
this manual that, when A1 is positive with respect to A2, the motor will rotate
clockwise (CW) while looking at the output shaft protruding from the front of the
motor. If this is opposite of the desired rotation, simply reverse the wiring of A1 and
A2 with each other.
Connections
