1 0
Connections
Connect a DC motor to terminals A1 and A2 as shown in Figure 4 (page 11).
Ensure
that the motor voltage and current ratings are consistent with the drive’s output
voltage and current.
Power input
Connect the AC line power leads to terminals L1 and L2, or to a single-throw, double-
pole master power switch (recommended).
Line fuse
Wire an external line fuse between the stop switch (if installed) and the L1 terminal as
shown in Figure 4. The XP03-115-SL line fuse should be rated at 250 volts and 8
amps.
