3-22
Chapter 3 Setup
Set the network
You can also perform network setting with “Network
Configurator”, the tool to perform network setting of
Mimaki’s product. To download the Network
Configurator, check “Driver / Utility” on the download
page at Mimaki Engineering (http://mimaki.com/
download/).
1
Press the
(MENU)
in Local.
2
Press
to select machine setup,
and press the
key.
3
Press the
(>>)
twice.
4
Press
to select “Network & Mail”,
and press the
key.
5
Press
to select “Network & Mail”,
and press the
key.
6
Press
to select “Check MAC
Address” and press the
key.
• The IP address currently used by this machine is
displayed.
7
Press
to select “Check MAC
Address”, and press the
key.
• The MAC address currently used by this machine
is displayed.
8
Press
to select “DHCP”, and
press the
key.
• Press [
][
] to set ON/ OFF.
• When it is ON, the IP address given by the DHCP
server is used.
9
Press
to select “AutoIP”, and
press the
key.
• Press “
”“
” to set ON/ OFF.
• When it is ON, the IP address is determined by
the AutoIP protocol. However, DHCP is ON,
DHCP has priority.
10
Press
to select the next items,
and press the
key.
• Both of DHCP and AutoIP is OFF, you can set IP
Address/ Default Gateway/ DNS Address/ Sub
Net Mask. For other than above, proceed to the
Step 13.
11
Press
to select the set
values.
12
Press
key to confirm the value.
13
Press
key several times to end
the setting.
Setting event mail function
Set the function to send e-mails to the set e-mail address
when events such as cutting start/ end and stop due to
an error.
You can also perform network setting with “Network
Configurator”, the tool to perform network setting of
Mimaki’s product. To download the Network
Configurator, check “Driver / Utility” on the download
page at Mimaki Engineering (http://mimaki.com/
download/).
Enable the event mail function
1
Press the
(MENU)
in Local.
2
Press
to select machine setup,
and press the
key.
3
Press the
(>>)
twice.
4
Press
to select “Network & Mail”,
and press the
key.
5
Press
to select “Event Mail” and
press the
key.
6
Press
to select “Mail Delivery”,
and press the
key.
7
Press
to select “ON” and press
the
key.
8
Press
key several times to end
the setting.
• After connecting with the network, it takes time
until the IP address is determined.
If the IP address has not been determined,
“0.0.0.0” is displayed.
• To reflect network setting, once turn off the power
supply and then turn it on again.
Disclaimer
• The customer is responsible for the communication fee for
Internet communication such as e-mail notification.
• The notification by the event mail function may not be
delivered due to Internet environment, failure of the device/
the power supply, etc. Mimaki has absolutely no
responsibility for any damages or loss resulting from non-
delivery or delays.
• You can use event mail function by connecting
LAN to this machine. Please prepare for LAN
cable connection beforehand.
• Not compatible with SSL communication.
