2-7
Chapter 2 Basic Operation
2
2
2
2
Setting a roll media
Prepare for the take-up device first
Prepare for the take-up device before setting the roll
media.
1
Remove the roll shaft on the take-up
device at the front of this machine.
(1)
Loosen the cover fixing screw attached to the
cover of left of take-up device and unlock the
AMF lock by sliding it.
(2)
Open the covers.
(3)
Loosen the cover fixing screw attached to the
cover of left of take-up device and unlock the
AMF lock by sliding it.
(4)
Open the covers.
(5)
Remove the roll shaft.
2
Remove the roll holders.
• The roll holders are on both for the right and left of
the roll holder. Remove both with the procedures
below:
(1)
Loosen screws (1 each on the right and left)
with supplied ratchet handle.
(2)
Remove the holders.
• Handle the roll shaft with care, since it is very
heavy with media. To avoid an accident or injury,
be sure to grip the handles on both ends.
Handle
Cover(left)
Cover(right)
Roll shaft
Cover fixing
screw
AMF lock
• When remove the AMF lock, the bottom cover will
be lowered.
AMF under cover
Ratchet handle
Roll holder
