MIMAKI TX300P-1800, Care And Maintenance

Page: 1 / 16

1
Color Inkjet Printer Tx300P-1800/Tx300P-1800 MkII
Requests for Care and Maintenance
This machine is a precision machine equipped with extremely fine mechanisms. Especially, the nozzle sur-
face of the heads from which the ink is discharged is affected even by a slightest attachment of dust or paper
powder and the proper printing results could not be obtained. With a view to using this machine in a better
condition, we would like to recommend performing the following care and maintenance on daily basis.
1. When to care
When to care What to care Reference Page
When the Machine Is Not Used
for a Long Time
Perform “Storage Wash” P.3
When replace the media Ink receiving spacer P.4
Once a day
(at the end of the daily work)
Surroundings of the heads P.4
Capping station P.5
Wiper P.6
Media press P.7
Media sensor P.7
Once a week
(at the end of the work on
weekend)
Cleaning the Platen P.8
Cleaning folding bar (take-up side) P.8
Cleaning the tension roller P.9
Exterior P.9
Waste ink tank P.9
Ink Discharge Passage P.9
Clean the edge of the head nozzle surface
(Only for Sb411+TP400, Sb411+Sb420 ink set)
P.10
Once a month
Fill up ink
(Only for Sb411+TP400 ink set)
P.10
When the platen is replaced
(Tx300P-1800 MkII only)
Cleaning the Platen P.11
Ink receiving spacer P.10
Media press P.10
In the event of damage, defor-
mation, excessive dirt, or when
periodic replacement is
required Replacement of supply parts
fan filter / Wiper / CP pat / Pinch rollers / Rubber stopper
for 2L case / MALE CONNECTOR ABSORBENT FOR
MBIS
P.12

Tools required for maintenance
• Cleaning stick (SPC-0527)
• Cleaning Liquid
• Cotton swab
• Safety glasses
• Gloves
• Soft fabric
• Techno wipe (SPC-0855)
• The maintenance cleaning liquid is different by use ink type.Use the cleaning liquid dedicated for the ink
being used.