9
(3) Tension roller (“Cleaning the tension roller” Chapter 4 of the Operation Manual)
Remove ink stain etc. adhering to the tension roller at the
front side of the machine.
Moisten soft cloth with water or waterish mild detergent,
squeeze tightly and then wipe it off.
(4) Exterior (“Cleaning the Exterior Surfaces”
Chapter 4, Operation Manual)
Depending on the using environment, the dusts or
sand powder could stick to the exterior of the main
unit. To avoid the entry of the dusts into the moving
part of the head, wipe them off with soft cloth dipped
into water and squeezed tightly.
(5) Waste ink tank (“If a Waste Ink Tank Confirmation Message Appears” Chapter 4 of
the Operation Manual)
Check whether the waste ink tank is full or not. Take care so that the
waste ink never overflows the tank.
(6) Ink Discharge Passage (“Washing the Ink Discharge Passage” Chapter 4 of the Oper-
ation Manual)
Wash the ink discharge passage (DISWAY WASH) regularly(about once a week) to prevent the head nozzles
from clogging due to ink coagulation inside the passage.
• The waste ink tank on the left does not cumulatively
count the amount of discharge of such a substance as
ink. Even if the level of dirty water in the tank becomes
80% or over, no message appears.
Check the level of dirty water in the tank on the left
often and dispose of waste ink tank if pooled and insert
the new waste ink tank.
• Before washing the ink discharge passage, make sure that the maintenance washing liquid is set. If
the maintenance washing liquid is not set, washing operation will not be conducted and the passage
could be clogged.
