13
(6) Male Connector Absorbent for MBIS (“” Chapter 4 of the Operation Manual)
When replacing the 2L ink pack, you can prevent dirt from entering the cradle by periodically (5 to 10 times)
replacing the male connector absorbent (accessory).
• Replace all eight spout rubber assys. as a set at the same time.
• Depending on the usage environment and usage conditions, the spout rubber may deteriorate within half
a year.
If the gap in the center expands as shown in the picture, please replace it regardless of if there is a
warning message.
When exchanging 2L ink pack, be sure to wear the included safety glasses and gloves. Ink
may spatter and get in your eyes accidentally.
• Be sure to wear the supplied safety glasses and gloves when replacing the male connector
absorbent.
• When the accessories are finished, please purchase from your local dealer or our sales office.
(PN:SPA-0625)
The beginning of spout rubber
It is available to use
It is necessary to replace
