11
(3) Platen (“Cleaning the Platen” Chapter 4 of the Operation Manual)
When printing on an loose fabric, some of the ink will pass
through the cloth and adhere to the platen.
If you are worried about ink stains, clean the adhered ink
according to the operation manual.
Continuing to use the media while it is dirty may cause
media to be fed incorrectly, or rubbing dirt or solid ink onto
the head nozzle surface, resulting in discharge failure (noz-
zle clogging, deflection, etc.).
• Turn off the main power and unplug the power
cable before maintenance.
• Do not allow liquids to enter the machine. There is
a risk of equipment failure, electric shock, or fire.
• If the dirt is noticeable, use a soft cloth soaked in
a neutral detergent diluted with water, wrung
out,and then wiped off.
• Before cleaning the platen, make sure that the
platen has cooled adequately.
• The groove that slides the media press and the
groove that cuts the media are particularly easy to
collect dust. Please carefully remove the dust.
