MIMAKI JV5-130S, Operation Manual

Page: 31 / 292

1-19
Basic specifications
*1 Without deflection of the roll when it is retained at both ends.
*2 Main unit and heater
*3 Without front exhaust unit
Distance accuracy Absolute accuracy Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Reoroducibility Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
Perpendicularity ± 0.5 mm / 1000 mm
Media skew 5 mm or less / 10 m variable
Head height adjustment Can be set by user steplessly in the range of 1.5 mm to 7 mm (media thickness is automati-
cally recognized)
Cutting of media Cutting of Y direction by the head cutter,
Cutting accuracy (steps) : 0.5 mm or less.
Media delivery Take-up device supplied as a standard accessory (switching possible between take-up with
print side inside and take-up with print side outside), which can be used only with a 3-inch
core
Waste ink tank Bottle type ( 4,000 cc)
FULL state is detected with sensor
Interface USB 2.0
Command MRL-III
Noise during standby Less than 58 dB (FAST-A, Front & Rear & Left & Right 1 m)
during continuous printing Less than 65 dB
during discontinuous printing Less than 70 dB
Nozzle check unit Laser beam type (CLASS 1 or below)
Safety Standard VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC, ), CB Report, RoHS, CLASS
1 Laser
Power AC 200 - 240 V ± 10%, 50/60 Hz ± 1 Hz 15A or less
Power consumption *2 3600 VA or less
Recomended Environment Available temp. 20 °C to 35 °C
Humidity 35 to 65 % Rh (No condensation)
Guaranteed temp. 20 °C to 25 °C
Temperature change ± 10 °C / h or less
Dust Equivalent to normal office level
Weight Main unit 292 kg (324 kg *3) 298 kg (333 kg *3)
Outside dimensions Width 2860 mm 3120 mm
Depth 900 mm (1050 mm *3) 900 mm (1050 mm *3)
Height 1551 mm 1551 mm
Item JV5-130S JV5-160S