manualshive.com logo in svg

MIMAKI JV5-130S, Operation Manual

Share
Download
MIMAKI JV5-130S Operation Manual Download Page 239

6-27

Invoking NCU functions

Outline of the NCU functions

The NCU functions consist of operations concerning the nozzle missing detection function.

Setting

Make settings of the function that monitors nozzle missing with the nozzle check unit.

Nozzle check

Set whether or not to perform nozzle missing detection.
Available setting values: [ON, OFF] (Default: ON)

NG ACTION (*1)

NG ACTION [DURING THE DRAW] (*1)

Set the operation of the printer during printing in case a preset number of missing nozzles or more are 
detected and thus 

NG

 judgment is made. (*2)

The detail setting menu for cleaning is displayed by pressing the [FUNCTION] key with [CLEAN-
ING&CONT] or [CLEANING&STOP] selected.

CLEANING TYPE [CLEANING&CONT], [CLEANING&STOP]
Set a type of cleaning.
Available setting values: [NORMAL, SOFT, HARD] ( Default: NORMAL)

RETRY COUNT [CLEANING&STOP]
Set the number of times cleaning is to be retried.
Available setting values: [0 ~ 3] (Default: 3)
With RETRY COUNT set to 3, the printer will perform cleaning operation a maximum of four times (as 
long as clogged nozzles are not corrected) including the first cleaning operation.

NG (*1): Bad nozzle condition.

NG (*2): One or more bad nozzles have been located on print head.

CONTINUE

The printer keeps on printing. (Default)

CLEANING&CONT

Corrects clogged nozzles by cleaning.
Whether the printer succeeds or fails in cleaning, it restarts printing.

CLEANING&STOP

Corrects clogged nozzles by cleaning.
If the printer fails in cleaning, it does not restart printing.

STOP

Stops printing.

Summary of Contents for JV5-130S





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands