MIMAKI JV5-130S, Operation Manual

Page: 4 / 292

ii

Not for use in a computer room as defined in the Standard for Protection Of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75 National Devision.
Interference to televisions and radios
The product described in this manual generates high frequency when operating.
The product can interfere with radios and televisions if set up or commissioned under improper conditions.
The product is not guaranteed against any damage to specific-purpose radio and televisions.
The product’s interference with your radio or television will be checked by turning on/off the power switch
of the product.
In the event that the product is the cause of interference, try to eliminate it by taking one of the following
corrective measures or taking some of them in combination.

Change the orientation of the antenna of the television set or radio to find a position without reception
difficulty.

Separate the television set or radio from this product.

Plug the power cord of this product into an outlet which is isolated from power circuits connected to the
television set or radio.
About media
Please follow the local regulations to dispose of roll sheets or other media.
FCC Statement (USA)

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the Operation manual,
may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.

In the case where MIMAKI-recommended cable is not used for connection of
this device, limits provided by FCC rules can be exceeded.
To prevent this, use of MIMAKI-recommended cable is essential for the connec-
tion of this printer.