MIMAKI CG-100SRII, Operation Manual, Page: 118 / 150

3-70
Function
name
Outline Setting values
Up Speed
This is to set the speed of sheet and
carriage movement when the tool is
up.
Setting the speed lower makes the
sheet misalignment reduced at the
time of long sheet feeding.
5,10,20,30,4
0,50,60,
AUTO
(cm/s)
When setting to AUTO, the speed value set
in the TOOL conditions is used as the up-
speed (but the lowest speed is 10cm/s).
Jog Step
This is to set the moving amount of
carriage and sheet via the jog key.
0.1mm
(set in mm)
0.1mm movement per jog key operation
1.0mm
(set in mm)
1.0mm movement per jog key operation
1/16inch
(set in inch)
1/16inch movement per jog key operation
1 / 2 5 4 i n c h
(set in inch)
1/254inch movement per jog key operation
mm/inch
This is to select the unit with which
you want to display the length.
mm This is to display in mm.
inch This is to display in inch.
Feed
Option
Feed
Offset
Regarding AUTO FEED,
this is to add the offset
value to feed a little bit
longer.
0 to 100cm
Fee
Speed
Set the speed of feeding. 1 to 20cm/s
Dummy
cutting
When this is set to “ON,” the blade
edge is made to turn to a specific
direction before starting cutting, which
allows dummy cutting.
ON
This is to perform dummy cutting every time
the tool and cutting conditions are changed.
OFF This is not to perform dummy cutting.
Sheet
setting This is to set the types of sheet
according to the sheet you use.
Standard
This is to be set when you use the regular
sheet.
Heavy
This is to be set when you use heavier
sheet than the regular one.
(But this reduces the cutting highest speed
down to 20cm/s.)
Compens
ated
pressure
offset
This is used to expand the value in
such a case as when the beginning
and end part of the cut are left cut.
0 to 7 Around 4g to around 28g
Pinch Roll
Select the number of pinch roller to
use.
See P.3-65.
Over Cut
Make the media without uncut area.
See P.3-63.
Start
Mode
Set the mode after detecting the
sheet.
LCL
The mode switches to the standby
condition of the local mode after detecting
the sheet.
REM
The mode automatically switches to the
remote mode after detecting the sheet.
Search
Mark
Set the automatic registration mark
search function performed after the
sheet is detected.
See P.3-30.
Seteup
Reset Reset the setting values to the initial
state.
See P.3-74.