3
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden
-
tally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
•
Do not use a battery pack or tool that is dam
-
aged or modified.
Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or tem
-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions.
Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCHES
• Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
• Use only sockets and other accessories spe-
cifically designed for use on impact wrenches
and drivers.
Other sockets and accessories might
shatter or break causing injury.
• If using with a lanyard, do not exceed maximum
capacity marked on the lanyard label.
Always de-
termine the weight of the product, with all accesso-
ries, when selecting the appropriate lanyard system.
Exceeding maximum capacity may result in serious
injury. See specifications for tool and battery weight.
• For best results, use with energy absorbing
lanyards.
Ropes, straps or chains may break and
cause failure. Do not use with lanyards at full tension.
• Chemical Burn Hazard. Keep coin cell battery
away from children.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools.
It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
•
Maintain labels and nameplates.
These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SPECIFICATIONS
Volts
..............................................................
18 DC
Battery Type
.................................................
M18™
Charger Type
................................................
M18™
No Load RPM
..............................................
0-1200
IPM
..............................................................
0-1440
Module/FCC ID ............................ BGM11S/QOQ11
Recommended Ambient
Operating Temperature
......................
0°F to 125°F
Cat. No. ..................................................... 2868-20
Anvil Type
.......................................
1" Square-Ring
Weight
...........................................................
21 lbs
(Tool-Only)
Weight
........................................................24.4 lbs
(With heaviest compatible battery pack)
Cat. No. ..................................................... 2869-20
Anvil Type
.......................
Extended 1" Square-Ring
Weight
........................................................23.7 lbs
(Tool-Only)
Weight
........................................................27.2 lbs
(With heaviest compatible battery pack)
FUNCTIONAL DESCRIPTION
9
Cat. No. 2869-20
1
3
4
5
6
Cat. No. 2868-20
1.
Side handle
2.
Tool hanger
3.
Control switch
4.
Trigger
5.
Handle
6.
MODE selector (not shown)
7.
LED
8.
Square drive anvil with friction ring
9.
Extended square drive anvil with friction ring
2
7
8
