![background image](http://html1.mh-extra.com/html/milwaukee/m18-force-logic-2877-20/m18-force-logic-2877-20_operators-manual_1799360005.webp)
5
A single crimp should be centered in the middle of the crimping area. Number of crimps is a minimum. Additional crimps would not negatively affect the
integrity of the connection so long as they are uniformly placed between the intended crimp area of the connector, typically outlined with color bands or knurls.
For the latest listing of approvals, visit milwaukeetool.com. For technical or service assistance, contact Milwaukee Customer Service at 1-800-729-3878.
ASSEMBLY
WARNING
Recharge only with the charger
specified for the battery. For spe
-
cific charging instructions, read the operator’s
manual supplied with your charger and battery.
Inserting/Removing the Battery
To
remove
the battery, push in the release buttons
and pull the battery pack away from the tool.
To
insert
the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Always remove battery pack before
changing or removing accesso-
ries. Only use accessories specifically recom
-
mended for this tool. Others may be hazardous.
CAUTION
To avoid damage to the tool, do not
operate the tool without the nest
being fully closed and latched.
WARNING
An incomplete or faulty crimp could
cause a fire. Use tool only with
connectors for which they are rated. Tool and
connectors must be used in an approved com
-
bination to achieve a successful operation. Im
-
proper combinations can result in a faulty crimp.
Electric shock, fire, explosion, and property
damage could occur.
ONE-KEY™
To learn more about the ONE-KEY™ function-
ality for this tool, please reference the Quick
Start guide included with this product or go to
milwaukeetool.com/One-Key. To download the
ONE-KEY™ app, visit the App Store or Google Play
from your smart device.
ONE-KEY™ Indicator
Solid Blue
Wireless mode is active and ready
to be configured via the ONE-KEY™
app.
Blinking Blue Tool is actively communicating with
the ONE-KEY™ app.
Blinking Red
Tool is in security lockout and can
be unlocked by the owner via the
ONE-KEY™ app.
OPERATION
WARNING
To reduce the risk of arc flash,
electric shock and property
damage, work on deenergized lines when
possible. Tool is not insulated. Should work
on energized lines be required, ensure all proper
precautions, including those contained in NFPA
70E, have been taken first.
Keep hands away from crimping jaws
while tool is in use. Fingers could be
crushed.
Always remove battery pack before changing
or removing accessories. Only use accessories
specifically recommended for this tool. Others
may be hazardous.
To reduce the risk of injury, always wear proper
eye protection marked to comply with ANSI Z87.1.
When working in dusty situations, wear appro-
priate respiratory protection or use an OSHA
compliant dust extraction solution.
Crimping
Before crimping:
• Inspect the crimping ram, nest and clevis for cracks
or other damage. Do not use damaged parts. Con
-
tact a MILWAUKEE
service facility.
Dual Rated Lugs & Splices with COPPER Wire
Anderson*
Blackburn
®
Burndy
ILSCO
Panduit
Penn-Union
T&B
Splice
Model #'s
VACS
ASP
YS-A
AS
ASN
SA
BCUA
60501-60578
Lug
Model #'s
VACL
ATL
YA-A
YA-ATN
ACL, 2ACL,
ACN, 2ACN,
ALND, ALNS
LAA
LAB
BLUA
60101-60178
60230-60278
Str Wire
Size Range
Lugs: Total # of Crimps
Splices: # of Crimps per Side
Anderson*
Blackburn
®
Burndy
ILSCO
Panduit
Penn-Union
T&B
#6 AWG
1-Splices Only
1
1
1
1
1
1
#4 AWG
1
#2 AWG
#1 AWG
1/0 AWG
2/0 AWG
3/0 AWG
4/0 AWG
250 MCM
300 MCM
350 MCM
400 MCM
500 MCM
600 MCM
750 MCM