background image

7

ACCESSORIES

WARNING

Use only recommended accesso-

ries. Others may be hazardous.

For a complete listing of accessories, go online to 

www.milwaukeetool.com or contact a distributor.

SERVICE - UNITED STATES

1-800-SAWDUST

 

(1.800.729.3878)

Monday-Friday, 7:00 AM - 6:30 PM CST

or visit 

www.milwaukeetool.com

Contact Corporate After Sales Service Technical 

Support  with  technical,  service/repair,  or  warranty 

questions. 
Email: [email protected]

Become a Heavy Duty Club Member at 

www.milwaukeetool.com  to  receive  important 

notifications regarding your tool purchases. 

SERVICE - CANADA

Milwaukee Tool (Canada) Ltd 

1.800.268.4015

Monday-Friday, 7:00 AM - 4:30 PM CST

or visit www.milwaukeetool.ca

LIMITED  WARRANTY                     

USA & CANADA

Every MILWAUKEE power tool* (see exceptions below) is 

warranted to the original purchaser only to be free from defects 

in material and workmanship.  Subject to certain exceptions, 

MILWAUKEE will repair or replace any part on an electric power 

tool which, after examination, is determined by MILWAUKEE 

to be defective in material or workmanship for a period of five 

(5) years** after the date of purchase unless otherwise noted.  

Return of the power tool to a MILWAUKEE factory Service Cen-

ter location or MILWAUKEE Authorized Service Station, freight 

prepaid and insured, is required.  A copy of the proof of purchase 

should be included with the return product.  This warranty does 

not apply to damage that MILWAUKEE determines to be from 

repairs made or attempted by anyone other than MILWAUKEE 

authorized personnel, misuse, alterations, abuse, normal wear 

and tear, lack of maintenance, or accidents.

Normal Wear:  Many power tools need periodic parts replace

-

ment and service to achieve best performance.  This warranty 

does not cover repair when normal use has exhausted the life of 

a part including, but not limited to, chucks, brushes, cords, saw 

shoes, blade clamps, o-rings, seals, bumpers, driver blades, 

pistons, strikers, lifters, and bumper cover washers.

*This warranty does not cover Air Nailers & Staplers; Airless 

Paint Sprayer; Cordless Battery Packs; Gasoline Driven Por

-

table Power Generators; Hand Tools; Hoist – Electric, Lever & 

Hand Chain; M12™ Heated Gear; Reconditioned Product; and 

Test & Measurement Products.  There are separate and distinct 

warranties available for these products.

**The warranty period for Job Site Radios, M12™ Power Port, 

M18™ Power Source, Jobsite Fan and Trade Titan™ Industrial 

Work Carts is one (1) year from the date of purchase.  The 

warranty period for the Drain Cleaning Cables is two (2) years 

from the date of purchase. The warranty period for the M18™ 

Compact Heat Gun and the 8 Gallon Dust Extractor is three (3) 

years from the date of purchase. The warranty period for the 

LED in the LED Work Light and the LED Upgrade Bulb for the 

Work Light is the lifetime of the product subject to the limitations 

above. If during normal use the LED or LED Bulb fails, the part 

will be replaced free of charge. 

Warranty Registration is not necessary to obtain the applicable 

warranty on a MILWAUKEE power tool product.  The manufac

-

turing date of the product will be used to determine the warranty 

period if no proof of purchase is provided at the time warranty 

service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACE

-

MENT REMEDIES DESCRIBED HEREIN IS A CONDITION 

OF  THE  CONTRACT  FOR  THE  PURCHASE  OF  EVERY 

MILWAUKEE  PRODUCT.    IF  YOU  DO  NOT AGREE  TO 

THIS  CONDITION, YOU  SHOULD  NOT  PURCHASE THE 

PRODUCT.  IN NO EVENT SHALL MILWAUKEE BE LIABLE 

FOR ANY  INCIDENTAL,  SPECIAL,  CONSEQUENTIAL  OR 

PUNITIVE  DAMAGES,  OR  FOR ANY  COSTS, ATTORNEY 

FEES,  EXPENSES,  LOSSES  OR  DELAYS ALLEGED TO 

BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE 

OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT 

LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.  SOME 

STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION 

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE 

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO 

YOU.  THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL 

OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL.  TO 

THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS 

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMI

-

TATION ANY IMPLIED WARRANTY OF MERCHANTABILITY 

OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO 

THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY 

LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE 

DURATION OF THE APPLICABLE EXPRESS WARRANTY AS 

DESCRIBED ABOVE.  SOME STATES DO NOT ALLOW LIMI

-

TATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, 

SO THE ABOVE  LIMITATION  MAY  NOT APPLY TO YOU, 

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, 

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY 

FROM STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada 

only.

Please  consult  the  ‘Service  Center  Search’  in  the  Parts  & 

Service section of MILWAUKEE’s website www.milwaukeetool.

com or call 1.800.SAWDUST (1.800.729.3878) to locate your 

nearest service facility for warranty and non-warranty service 

on a Milwaukee electric power tool. 

LIMITED WARRANTY - MEXICO, 

CENTRAL AMERICA & CARIBBEAN

TECHTRONIC INDUSTRIES' warranty is for 5 years since the 

original purchase date. 

This warranty card covers any defect in material and workman-

ship on this Product.

To make this warranty valid, present this warranty card, sealed/

stamped by the distributor or store where you purchased the 

product, to the Authorized Service Center (ASC). Or, if this 

card has not been sealed/stamped, present the original proof 

of purchase to the ASC.

Call toll-free1 01 (800) 030-7777 to find the nearest ASC, for 

service, parts, accessories or components.

Procedure to make this warranty valid

Take the product to the ASC, along with the warranty card 

sealed/stamped by the distributor or store where you purchased 

the product, and any faulty piece or component will be replaced 

without cost for you. We will cover all freight costs relative with 

this warranty process.

Exceptions

This warranty is not valid in the following situations

a) When the product is used in a different manner from the 

end-user guide or instruction manual.

b) When the conditions of use are not normal.

c) When the product was modified or repaired by people not 

authorized by TECHTRONIC INDUSTRIES. 

Note: 

If cord set is damaged, it should be replaced by an 

Authorized Service Center to avoid electric risks.

SERVICE AND ATTENTION CENTER

Call to 01 (800) 030-7777

IMPORTED AND COMMERCIALIZED BY

TECHTRONIC INDUSTRIES MEXICO, SA DE CV

Av President Masarik #29 piso 7, Col. Polanco V Sección

CP 11560, Deleg. Miguel Hidalgo, CDMX

Model:
Date of Purchase:

Distributor or Store Stamp:

Summary of Contents for M18 2648-20





















Reviews: