Milwaukee M18 2123-20 Operator'S Manual Download

Page: 3 / 16

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the

manufacturer.

A charger that is suitable for one type

of battery pack may create a risk of fire when used

with another battery pack.

•

Use power tools only with specifically designated

battery packs.

Use of any other battery packs may

create a risk of injury and fire.

•

When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal
to another.

Shorting the battery terminals together

may cause burns or a fire.

•

Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

•

Do not use a battery pack or tool that is dam

aged or modified.

Damaged or modified batteries

may exhibit unpredictable behavior resulting in fire,

explosion or risk of injury.

•

Do not expose a battery pack or tool to fire or

excessive temperature.

Exposure to fire or tem

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions.

Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk

of fire.

SERVICE

• Have your power tool serviced by a qualified

repair person using only identical replacement
parts.

This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs.

Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

SEARCH LIGHT

• Do not use magnet for horizontal overhead

mounting.

•

This light should not be illuminated while driv

ing on public roads except when authorized for

emergency situations. Check local motor vehicle

and traffic regulations for your area of operation.

• Always use common sense and be cautious when

using tools.

It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

•

Maintain labels and nameplates.

These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

Federal Communications Commission

WARNING:

Changes or modifications to this unit

not expressly approved by the party responsible for
compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause

undesired operation.

NOTE:

This equipment has been tested and found

to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against
harmful interference when the equipment is operated

in a commercial environment. This equipment gener

ates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference

to radio communications. Operation of this equip

ment in a residential area is likely to cause harmful
interference in which case the user will be required

to correct the interference at his own expense.

Canadian RSS-210

This device complies with RSS-210 of the Industry

Canada Rules. Operation is subject to the following

conditions:

1) this device may not cause interference and
2) this device must accept any interference, including

interference that may cause undesired operation

of the device.

SPECIFICATIONS

Cat. No. ..................................................... 2123-20