2
3
GENERAL PRODUCT SAFETY
WARNINGS
WARNING
Read all safety warnings and in-
structions. Failure to follow all in-
structions listed below may result in electric
shock, fi re and/or serious injury. Save all warn-
ings and instructions for future reference.
.
WORK AREA SAFETY
• Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
ELECTRICAL SAFETY
• Do not expose heated hoodie to rain or wet condi-
tions.
Water will increase the risk of electric shock.
• Do not abuse the power cable. Never use the cord
for carrying, pulling or unplugging the heated
hoodie. Keep cord away from heat, oil, sharp
edges or moving parts.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when using the heated hoodie.
Do not use while you are tired or under the infl u-
ence of drugs, alcohol or medication.
A moment
of inattention may result in serious personal injury.
POWER TOOL USE AND CARE
• Do not use the heated hoodie if the power button
does not turn it on and off.
Any heated
hoodie
that cannot be controlled with the power button is
dangerous and must be repaired.
• Disconnect the battery pack from the heated
hoodie before storing.
Such preventive safety mea-
sures reduce the risk of starting the heated
hoodie
accidentally.
• Store out of the reach of children and do not al-
low persons unfamiliar with these instructions to
operate the heated hoodie.
Heated
hoodie
can be
dangerous in the hands of untrained users.
• Maintain heated hoodie. Check for breakage of
parts and any other condition that may affect the
heated hoodie’s operation. If damaged, have the
heated hoodie repaired before use.
• Use the heated hoodie in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of
the heated
hoodie
for operations different from those
intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specifi ed by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fi re when used
with another battery pack.
• Use heated hoodie only with specifi cally desig-
nated battery packs.
Use of any other battery packs
may create a risk of injury and fi re.
• When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another.
Shorting the battery terminals together may
cause burns or a fi re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, fl ush with water. If liquid con-
tacts eyes, additionally seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
SERVICE
• Have your heated hoodie serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the heated
hoodie is maintained.
SPECIFIC SAFETY RULES FOR
HEATED HOODIE
Read instructions carefully.
Use:
• Do not use this heated hoodie with an infant,
child, a helpless person, or anyone insensitive to
heat, such as a person with poor blood circula-
tion.
• If you have a medical condition making you sen-
sitive to overheating, or you use any personal
medical devices
, consult the devise manufacturer
and/or your physician to determine if use of this
product is appropriate.
• Never use if inner liner is wet.
• Heating elements are not recommended to touch
bare skin.
• Shut off power immediately if discomfort occurs.
• Do not allow the cords to be pinched.
• If improper operation of this heated hoodie is
observed, discontinue its use immediately
and
contact a
MILWAUKEE service facility for repair.
• Do not use pins
. They may damage the electric wiring.
Care:
• Before washing, disconnect and remove battery
pack and battery holder from battery holder
pocket. Push the power cord completely into the
battery holder pocket and fasten closed.
• Follow Care Instructions on hoodie tags. Machine
wash, Gentle Cycle in warm water. Tumble Dry
Low Heat.
• Do not bleach.
• Do not iron.
• Do not wring or twist.
• Do not dry clean.
Do not use dry-cleaning fl uid on
this heated hoodie. Do not bleach. Cleaning solvents
may have a deteriorating effect on the insulation of
the heating element.
•
Maintain labels and nameplates.
These carry
important information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
SYMBOLOGY
Volts
Direct
Current
Machine wash, gentle cycle in warm water
Do not bleach
Do not wring or twist
Tumble dry, low heat
Do not iron
Do not dry-clean
SPECIFICATIONS
Cat. No. .......................... 301B, 301G, 301R, 321C
43-72-1000
Volts.............................................................. 12 DC
Battery Type ................................................. M12™
Charger Type................................................ M12™
FUNCTIONAL DESCRIPTION
2
1
1. Power button
High: Red LED
Medium: White LED
Low: Blue LED
2
2
3
4
5
2. Battery holder
3. Power cable port
4. Battery holder pocket
5. Power cable
ASSEMBLY
WARNING
Recharge only with the charger
specifi ed for the battery. For spe-
cifi c charging instructions, read the operator’s
manual supplied with your charger and battery.
Inserting/Removing the Battery
To
insert
the battery, slide the pack into the body
of the battery holder. Make sure it latches securely
into place.
Insert the power cable (from inside the battery holder
pocket) into the power cable port on the battery holder.
Place the battery holder into the pocket and press
pocket closed.
To
remove
the battery, push in the release buttons
and pull the battery pack away from the holder.
OPERATION
The power button is located on the upper left side
of the hoodie. The button is on the outside of the
hoodie on Cat. No. 301B, 301G, and 301R, and on
the inside on Cat. No. 321C.
To
turn on
, press and hold the heated hoodie power
button (1 to 2 seconds). The hoodie will be turned to
High and the red LED will light.
Temperature setting can be
adjusted
at any time
by pressing the heated hoodie power button. Each
press will cycle through the heated hoodie’s tem-
perature settings.
To
turn off
the heated hoodie, press and hold the
heated hoodie power button until the LED turns off
(1 to 2 seconds).
If the heated hoodie turns off unexpectedly, check
connections and charge the battery pack.
CARE
WARNING
To reduce the risk of injury, always
unplug the charger and remove the
battery pack and battery holder from the heated
hoodie before performing any maintenance.
Never disassemble the heated hoodie, battery
pack or charger. Contact a MILWAUKEE service
facility for ALL repairs.
If the heated hoodie does not start or operate properly
with a fully charged battery pack, clean the contacts
on the battery pack. If the heated hoodie still does
not work properly, return the heated hoodie, charger
and battery pack, to a MILWAUKEE service facility
for repairs.
WARNING
To reduce the risk of personal in-
jury and damage, disconnect and
remove battery pack and battery holder from
battery holder pocket before washing. Never im-
merse your battery holder, battery pack, or
charger in liquid or allow a liquid to fl ow inside
them.
To clean the heated hoodie:
1. Remove battery pack and battery holder.
2. Push the power cord completely into the battery
holder pocket and fasten closed.
3. Machine wash, Gentle Cycle in warm water. Do
not use bleach. Do not dry clean. Do not wring or
twist.
4. Tumble Dry on Low Heat. Do not iron.
Note:
High Visibility hoodies can only be washed a
maximum of 25 times.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST
(1.800.729.3878)
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit
www.milwaukeetool.com
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: [email protected]
B e c o m e a H e a v y D u t y C l u b M e m b e r a t
www.milwaukeetool.com to receive important
notifi cations regarding your tool purchases.
SERVICE - CANADA
Milwaukee Tool (Canada) Ltd
1.800.268.4015
Monday-Friday, 7:00 AM - 4:30 PM CST
or visit www.milwaukeetool.ca
LIMITED WARRANTY
USA & CANADA
Every MILWAUKEE M12 HEATED JACKET (including its battery holder)
is warranted to the original purchaser only to be free from defects in
material and workmanship. Subject to certain exceptions, MILWAUKEE
will repair or replace any part on M12™ Heated Jacket which, after
examination, is determined by MILWAUKEE to be defective in material
or workmanship for a period of one (1) year* after the date of purchase.
Return of the Heated Jacket to a MILWAUKEE factory Service Center
location, freight prepaid and insured, is required. A copy of the proof
of purchase should be included with the return product. This warranty
does not apply to damage that MILWAUKEE determines to be from
repairs made or attempted by anyone other than MILWAUKEE person-
nel, misuse, alterations, abuse, normal wear and tear, or accidents.
*This warranty does not cover a M12™ LITHIUM-ION Battery Pack;
there is a separate and distinct warranty available for a battery pack.
Warranty Registration is not necessary to obtain the applicable warranty
on a MILWAUKEE heated jacket. The manufacturing date of the product
will be used to determine the warranty period if no proof of purchase
is provided at the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT
REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON-
TRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT.
IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT
PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE
LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES,
EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CON-
