Milwaukee FORCE LOGIC 2779-20 Operator'S Manual Download Page 8

8

WARNING

To reduce the risk of personal in-

jury and damage, never immerse 

your tool, battery pack or charger in liquid or 

allow a liquid to flow inside them.

Cleaning

Clean  dust  and  debris  from  vents.  Keep  handles 

clean, dry and free of oil or grease. Use only mild 

soap and a damp cloth to clean, since certain clean-

ing agents and solvents are harmful to plastics and 

other insulated parts. Some of these include gasoline, 

turpentine, lacquer thinner, paint thinner, chlorinated 

cleaning solvents, ammonia and household deter-

gents containing ammonia. Never use flammable or 

combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and charger 

to the nearest authorized service center.

ACCESSORIES

WARNING

Use only recommended accesso-

ries. Others may be hazardous.

For a complete listing of accessories, go online to 

www.milwaukeetool.com or contact a distributor.

WIRELESS COMMUNICATION

For products provided with wireless communication 

features, including ONE-KEY™:

Pursuant  to  part  15.21  of  the  FCC  Rules,  do  not 

modify  this  product.    Modification  could  void  your 

authority to operate the product. This device complies 

with part 15 of the FCC Rules and ISED-Canada's 

license exempt RSS standards. Operation is subject 

to the following two conditions: 1) This device may 

not cause harmful interference, and 2) This device 

must accept any interference received, including 

interference that may cause undesired operation.

SERVICE - UNITED STATES

1-800-SAWDUST

 

(1.800.729.3878)

Monday-Friday, 7:00 AM - 6:30 PM CST

or visit 

www.milwaukeetool.com

Contact Corporate After Sales Service Technical 

Support  with  technical,  service/repair,  or  warranty 

questions. 

Email: [email protected]

Become a Heavy Duty Club Member at 

www.milwaukeetool.com  to  receive  important 

notifications regarding your tool purchases. 

SERVICE - CANADA

Milwaukee Tool (Canada) Ltd 

1.877.948.2360

Monday-Friday, 7:00 AM - 4:30 PM CST

or visit 

www.milwaukeetool.ca

LIMITED  WARRANTY                     

USA & CANADA

Every MILWAUKEE power tool* (see exceptions below) is warranted 

to the original purchaser only to be free from defects in material and 

workmanship.  Subject to certain exceptions, MILWAUKEE will repair 

or replace any part on an electric power tool which, after examination, 

is determined by MILWAUKEE to be defective in material or workman-

ship for a period of five (5) years** after the date of purchase unless 

otherwise noted. Return of the power tool to a MILWAUKEE factory 

Service Center location or MILWAUKEE Authorized Service Station, 

freight prepaid and insured, is required. A copy of the proof of purchase 

should be included with the return product. This warranty does not 

apply to damage that MILWAUKEE determines to be from repairs 

made or attempted by anyone other than MILWAUKEE authorized 

personnel, misuse, alterations, abuse, normal wear and tear, lack of 

maintenance, or accidents.

Normal Wear:  Many power tools need periodic parts replacement and 

service to achieve best performance. This warranty does not cover 

repair when normal use has exhausted the life of a part including, 

but not limited to, chucks, brushes, cords, saw shoes, blade clamps, 

o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and 

bumper cover washers.

*This warranty does not cover Air Nailers & Staplers; Airless Paint 

Sprayer; Cordless Battery Packs; Gasoline Driven Portable Power Gen-

erators; Hand Tools; Hoist – Electric, Lever & Hand Chain; M12™ Heat-

ed Gear; Reconditioned Product; and Test & Measurement Products.  

There are separate and distinct warranties available for these products.

**The warranty period for Job Site Radios, M12™ Power Port, M18™ 

Power Source, Jobsite Fan and Trade Titan™ Industrial Work Carts 

is one (1) year from the date of purchase. The warranty period for 

the M18 FUEL™ 1" D-Handle High Torque Impact Wrenches, Drain 

Cleaning Cables, AIRSNAKE™ Drain Cleaning Air Gun Accessories, 

REDLITHIUM™  USB  Laser  Levels, TRAPSNAKE™  25' Auger  w/ 

CABLE DRIVE™, FORCE LOGIC™ Press Tool Accessories and Green 

Cross Line Laser is two (2) years from the date of purchase. The war

-

ranty period for the M18™ Compact Heat Gun, 8 Gallon Dust Extrac-

tor, M18™ Framing Nailers, M18 FUEL™ 1/2" Ext. Anvil Controlled 

Torque Impact Wrench w/ ONE-KEY™, M18 FUEL™ 1" High Torque 

Impact Wrench w/ ONE-KEY™, M18 FUEL™ 2 Gal. Compact Quiet 

Compressor, M12™ Laser Levels, 165' Laser Detector, M12™ 23GA 

Pin Nailer, M18 FUEL™ 1/4" Blind Rivet Tool w/ ONE-KEY™, M12 

FUEL™ Low Speed Tire Buffer, M18 FUEL™ Random Orbital Polish

-

ers, M18™ Utility Fencing Stapler, and the 72" Laser Tripod is three (3) 

years from the date of purchase. The warranty period for the LED in the 

LED Work Light and the LED Upgrade Bulb for the Work Light is the 

lifetime of the product subject to the limitations above. If during normal 

use the LED or LED Bulb fails, the part will be replaced free of charge. 

Warranty Registration is not necessary to obtain the applicable war-

ranty on a MILWAUKEE power tool product. The manufacturing date 

of the product will be used to determine the warranty period if no proof 

of purchase is provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT 

REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON-

TRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT.  

IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT 

PURCHASE THE PRODUCT.  IN NO EVENT SHALL MILWAUKEE 

BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL 

OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, 

EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSE-

QUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY 

PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR 

LOSS OF PROFITS.  SOME STATES DO NOT ALLOW THE EX

-

CLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 

APPLY TO YOU.  THIS WARRANTY IS EXCLUSIVE AND IN LIEU 

OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL.  

TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS 

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION 

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 

FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH 

DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR-

RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE 

EXPRESS WARRANTY AS DESCRIBED ABOVE.  SOME STATES 

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-

RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO 

YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, 

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM 

STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada only.

Please consult the ‘Service Center Search’ in the Parts & Service sec-

tion of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.

SAWDUST (1.800.729.3878) to locate your nearest service facility for 

warranty and non-warranty service on a Milwaukee electric power tool. 

Summary of Contents for FORCE LOGIC 2779-20

























Reviews: