6
SYMBOLOGY
Volts
Direct Current
Underwriters Laboratories, Inc.
WARNING
To reduce the risk of arc
flash, electric shock and
property damage, work on deenergized
lines when possible. Tool is not insulated.
Should work on energized lines be re-
quired, ensure all proper precautions, in-
cluding those contained in NFPA 70E,
have been taken first.
WARNING
Keep hands away from
crimping jaws while tool is
in use. Fingers could be crushed.
To reduce the risk of injury, wear safety
goggles or glasses with side shields when
operating or servicing the tool.
Read operator's manual.
SPECIFICATIONS
Cat. No. ..................................................... 2779-20
Volts
..............................................................
18 DC
Battery Type
.................................................
M18™
Charger Type
................................................
M18™
Module/FCC ID .....................BLE113/QOQBLE113
Force
..........................................................
12 Tons
Capacity
...................................
#8AWG - 750 MCM
Recommended Ambient
Operating Temperature
......................
0°F to 122°F
FUNCTIONAL DESCRIPTION
2
7
8
1
6
5
3
1. Crimping jaws
2. Lift ring
3. LEDs/Crimping
indicator
4. Internal battery
5. ONE KEY
TM
indicator
6. Handle
7. Reverse trigger
8. Trigger
9. Die release pins
4
9
ASSEMBLY
WARNING
Recharge only with the charger
specified for the battery. For spe
-
cific charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To
remove
the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
Always remove battery pack before
changing or removing accessories.
To
insert
the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Only use accessories specifically
recommended for this tool. Others
may be hazardous.
An incomplete or faulty crimp could cause a fire.
Use tool only with MILWAUKEE "U" dies and
connectors for which they are rated. Jaws, dies,
and connectors must be used in an approved
combination to achieve a successful operation.
Improper combinations can result in a faulty
crimp. Electric shock, fire, explosion, and prop
-
erty damage could occur.
Changing the Dies
Inspect dies and connectors before use. Only use
properly matched dies and connectors for the crimp-
ing jaws. Refer to Specifications for die/connector
compatibility.
1. Remove the battery pack.
2.
Snap the appropriate dies into each side of the
crimping jaws.
3.
To remove, press the release button for each side
of the crimping jaws. Pull dies out from crimping
jaws.
ONE-KEY™
To learn more about the ONE-KEY™ functionality
for this tool, go to milwaukeetool.com/One-Key. To
download the ONE-KEY™ app, visit the App Store
or Google Play from your smart device.
ONE-KEY™ Indicator
Solid Blue
Wireless mode is active and ready
to be configured via the ONE-KEY™
app.
Blinking Blue Tool is actively communicating with
the ONE-KEY™ app.
Blinking Red
Tool is in security lockout and can
be unlocked by the owner via the
ONE-KEY™ app.
