page 3
6
3
4
5
8
9
10
2
1
7
FUNCTIONAL DESCRIPTION
Volts Direct Current
No Load Revolutions
Per Minute (RPM)
1.
Side handle
2.
Depth gauge
3.
Nameplate
4.
Forward/Lock/Reverse switch
5.
Trigger
6.
Battery pack release buttons
7.
Battery pack
8.
Hammer/Drill shift knob
9.
Chuck collar
10. Dust shield
SPECIFIC SAFETY RULES
1.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring.
Contact
with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2.
Wear ear protectors when using the tool fool for extended periods.
Prolonged exposure to high intensity noise can cause hearing loss.
3.
Keep hands away from all cutting edges and moving parts.
4.
Maintain labels and nameplates.
These carry important information. If unreadable or missing, contact a
MILWAUKEE service facility for a free
replacement.
5.
WARNING!
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•
lead from lead-based paint
•
crystalline silica from bricks and cement and other masonry products, and
•
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
Specifications
Rotary Hammer
(concrete)
No Load
RPM
0 - 850
No Load Blows
per Minute
0 - 3700
Cat. No.
5361-20
Twist
Drill Bit
1/2"
Carbide Tipped
Percussion Bit
3/16"-3/4"
Drill Only
(steel or wood)
Tool
Thin Wall
Percussion Bit
1-3/4"
Capacities
Vo l ts
DC
1 8
Properly Recycle Nickel
Cadmium Batteries
Underwriters
Laboratories Inc.
Symbology
