4
Cat. No. 5337-20
1
10
1
11
2
3
7
1
8
9
11
Cat. No. ..................................................... 5340-21
Amps
...................................................................15
No Load RPM*......................................... 125 - 250
Max Percussion Drill Bit Diameter
............
2" Spline
Max Percussion Core Bit Diameter
†
................. 6"
†
Chisel Shank type
....3/4" Hex with 21/32" Round
† †
Cat. No. ..................................................... 5342-20
Amps
...................................................................15
No Load RPM*......................................... 125 - 250
Max Percussion Drill Bit Diameter
.......
2" SDS-Max
Max Percussion Core Bit Diameter
†
................. 6"
†
Chisel Shank type
................................
SDS-Max
† †
Cat. No. ..................................................... 5342-21
Amps
...................................................................15
No Load RPM*......................................... 125 - 250
Max Percussion Drill Bit Diameter
.......
2" SDS-Max
Max Percussion Core Bit Diameter
†
................. 6"
†
Chisel Shank type
................................
SDS-Max
† †
*
EFCC - The Electronic Feedback Control Circuit maintains
constant speed under varying load conditions.
†
Use MILWAUKEE core bits Cat. No. 48-20-5125 through 48-
20-5165. Do not use LHS (Large Hole System) Components
with rotary hammers 5340-20 and 5342-20. The bits could
fail, breaking apart at the threaded stud and causing injury
and property damage.
† †
See "Chiseling and Chipping".
Volts
.............................................................120 AC
Volts
.............................................................120 AC
Blows/Minute ........................................975 - 1950*
Chisels
......................
See "Chiseling and Chipping"
Cat. No. ..................................................... 5337-20
Amps
...................................................................14
Chisel Shank type
..................................3/4" Hex
† †
Cat. No. ..................................................... 5337-21
Amps
...................................................................14
Chisel Shank type
..................................3/4" Hex
† †
Cat. No. ..................................................... 5339-20
Amps
...................................................................14
Chisel Shank type
................................
SDS-Max
† †
Cat. No. ..................................................... 5339-21
Amps
...................................................................14
Chisel Shank type
................................
SDS-Max
† †
Cat. No. ..................................................... 5340-20
Amps
...................................................................15
No Load RPM*......................................... 125 - 250
Max Percussion Drill Bit Diameter
............
2" Spline
Max Percussion Core Bit Diameter
................... 6"
†
Chisel Shank type
....3/4" Hex with 21/32" Round
† †
4
5
1. Vibration isolation system
2. On/Off trigger switch
3. Soft grip handle
4. Service indicator light
5. Speed control dial
6. Lock-on button (Cat. Nos. 5337-20,
5339-20 only)
6
7. Spade side handle (Cat. Nos. 5337-20, 5339-20 only)
8. Spade side handle adjusting knob (Cat. Nos. 5337-20, 5339-20 only)
9. Bit lock (Cat. Nos. 5337-20, 5340-20 only)
10. Straight side handle (must be used when hammering with rotation)
11. Straight side handle mounting positions (3 locations)
12. Action selector (Cat. No. 5339-20, 5342-20 only)
SPECIFICATIONS
FUNCTIONAL DESCRIPTION
12
11
Cat. No. 5342-20