7
PAGE
4939 5228 01
Assembly
Mounting the
bearing sleeve
1
Insert the bearing sleeve (2) into the hous-
ing (1) as far as it will go.
☞
Do not pre-assemble the bearing
sleeve (2) on the armature. When
mounting the armature in the motor
housing (1), the bearing sleeve (2) is
pushed into the magnetic disc of the
armature. This might result in malfunc-
tion of the machine!
Machines with
electronics:
Mounting
the field
Mounting
the electronic
element
1
Insert the field (1) into the motor hous-
ing (2).
2
Machines with constant electronics:
Connect the electronic element (D) to the
field (1) (e, d, f, g, k) and insert it.
3
Machines with speed electronics:
Connect the electronic element (C) to the
field (1) (e, d, f, g, k) and insert it.
4
Machines with QUIK-LOK: Mount the in-
sert (E) (to connect the Quick-Lock cable).
5
Insert the mains connection cable (9).
Connect the mains feed lines (a, b) (6) to
the switch (8). Insert the switch (8).
6
Screw down the strain relief (7).
7
Connect the connecting cables (3) to the
carbon brush holders (4) and insert them
on both sides.
8
Put together the handle halves (B)
and fasten them with seven screws (A)
and (5).
☞
Take care that all electronic parts are
inserted properly into the handle (B)
and that no part is squeezed or
jammed!
1
2
1
e
d
a
b
i
a
b
h
f
g
e
g
k
k
b
a
k
f
d
d
f
k
b
a
1
2
3
3
4
6
5
A
7
8
4
B
C
D
E
9
2