background image

2

3

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Read, understand and follow all 

instructions. 

Failure to heed all 

warnings listed below, may result in electric shock, 

fire and/or serious personal injury. 

Keep these in-

structions.
• Read these instructions.

• Keeps these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

 Never immerse 

the apparatus in liquid or allow a liquid to flow inside the 

apparatus. Water entering an apparatus will increase 

the risk for electric shock.

• Clean only with dry cloth. 

Certain cleaning agents 

and solvents are harmful to plastics and other insulated 

parts.  Some  of  these  include:  gasoline,  turpentine, 

lacquer thinner, paint thinner, chlorinated cleaning sol-

vents, ammonia and household detergents containing 

ammonia. Clean dust and debris from vents. Keep the 

apparatus handle clean, dry and free of oil or grease. 

• Do not block any ventilation openings.

 Install in 

accordance with the manufacturer’s instructions.

• Do not use near any heat sources

 such as radiators, 

heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat.

• Use only attachments/accessories specified by the 

manufacturer.

• Only operate this apparatus in a well ventilated area.

• Refer all servicing to qualified service personnel.

 

Servicing  is  required  when  the  apparatus  has  been 

damaged in any way, such as power-supply cord or 

plug  is  damaged,  liquid  has  been  spilled  or  objects 

have  fallen  into  the  apparatus,  the  apparatus    has 

been exposed to rain or moisture or does not operate 

normally. Service or maintenance performed by unquali-

fied personnel could result in a risk of injury. 

• A battery operated apparatus with integral batter-

ies or a separate battery pack must be recharged 

only with the specified charger for the battery.

 A 

charger that may be suitable for one type of battery 

may create a risk of fire when used with another battery.

• Use battery operated apparatus only with specifi-

cally designated battery packs.

 Use of any other bat-

teries may create a risk of fire.

• When battery pack is not in use, keep it away from 

other metal objects like: paper clips, coins, keys, 

nails, screws, or other small metal objects that can 

make a connection from one terminal to another.

 

Shorting  the  battery  terminals  together  may  cause 

sparks, burns, or a fire.

• Avoid body contact with grounded surfaces such 

as pipes, radiators, ranges and refrigerators.

 There 

is an increased risk of electric shock if your body is 

grounded.

• Never disassemble the apparatus or try to do any 

rewiring on the apparatus's electrical system.

• Do not expose this apparatus to dripping and splash-

ing, or place objects filled with liquids on this unit. 

SPECIFIC SAFETY RULES

• Maintain labels and nameplates. 

These carry im-

portant information. If unreadable or missing, contact 

a

 

MILWAUKEE service facility for a free replacement.

• This apparatus is designed to be powered by either 

an 18 volt or a 12 volt MILWAUKEE

 

Li-ion

 

battery 

pack.

 Do not attempt to use with any other voltage or 

power supply. 

Federal Communications Commission

WARNING:

 Changes or modifications to this unit 

not expressly approved by the party responsible for 

compliance could void the user’s authority to operate 

the equipment.

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: (1) 

this device may not cause harmful interference, and 

(2) this device must accept any interference received, 

including interference that may cause undesired 

operation.

NOTE: This  equipment  has  been  tested  and  found 

to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are 

designed  to  provide  reasonable  protection  against 

harmful interference in a residential installation. This 

equipment  generates,  uses  and  can  radiate  radio 

frequency  energy  and,  if  not  installed  and  used  in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there 

is no guarantee that interference will not occur in a 

particular  installation.  If  this  equipment  does  cause 

harmful interference to radio or television reception, 

which  can  be  determined  by  turning  the  equipment 

off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures: 

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and 

receiver. 

• Connect the equipment into an outlet on a circuit dif-

ferent from that to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV techni-

cian for help.

The transmitter must not be co-located or operated in 

conjunction with any other antenna or transmitter. This 

equipment complies with the FCC RF radiation expo-

sure  limits  set  forth  for  an  uncontrolled  environment. 

This equipment should be installed and operated with 

a minimum distance of 20 cm between the radiator and 

any part of your body.

SYMBOLOGY

 

  

Volts

 

 

Direct Current

 

 

Double Insulated

 

  

Amps

 

 

To reduce the risk of injury, user must  

 

 

read operator's manual.

 

C

US

  UL Listing for Canada and U.S.

 

 

Indoor Use Only

 

 

Energy Efficiency

Summary of Contents for 2891-20










Reviews: