background image

30

31

ACCESSORIES

For a complete listing of accessories refer to your

 

MILWAUKEE 

Electric Tool catalog or go online 

to www.milwaukeetool.com. To obtain a catalog, 
contact your local distributor or service center.

WARNING 

Always remove battery pack 

before changing or removing accessories. 
Only use accessories specifi cally recommend-
ed for this tool. Others may be hazardous. 

Maintaining Tool 

Keep your tool, battery pack and charger in good 
repair by adopting a regular maintenance program. 
After six months to one year, depending on use, 
return the tool, battery pack and charger to 

MILWAUKEE

 service facility for:

• Lubrication
• Mechanical inspection and cleaning (gears, spin-

dles, bearings, housing, etc.)

• Electrical inspection (battery pack, charger, motor)
• Testing to assure proper mechanical and electrical 

operation

If the tool does not start or operate at full power 
with a fully charged battery pack, clean the contacts 
on the battery pack. If the tool still does not work 
properly, return the tool, charger and battery pack, 
to a 

MILWAUKEE

 service facility for repairs.

MAINTENANCE

Cleaning

Clean dust and debris from charger and tool vents. 
Keep tool handles clean, dry and free of oil or 
grease. Use only mild soap and a damp cloth to 
clean the tool, battery pack and charger since certain 
cleaning agents and solvents are harmful to plastics 
and other insulated parts. Some of these include 
gasoline, turpentine, lacquer thinner, paint thinner, 
chlorinated cleaning solvents, ammonia and house-
hold detergents containing ammonia. Never use 
fl ammable or combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and 
charger to the nearest service center.

WARNING 

To reduce the risk of per-

sonal injury and damage, never immerse your 
tool, battery pack or charger in liquid or allow 
a liquid to fl ow inside them.

WARNING 

To reduce the risk of injury, 

always unplug the charger and remove the 
battery pack from the charger or tool before 
performing any maintenance. Never disas-
semble the tool, battery pack or charger. 
Contact a MILWAUKEE
 service facility for 
ALL repairs.

Summary of Contents for 2731-059


















Reviews: