Milnor TP1607 Series, Installation And Service

Page: 29 / 50

To Set Keystrokes Resulting Display Explanation
Minimum system pressure
To view
+
Vu®
Displays the lowest
measured pressure the
system has reached.
To clear
+ +
:
Sets mimimum pressure to
125% of the maximum
pressure.
Software date
To view
+
Ÿ®®
Displays the software
version.
Error message
To view
+
‘®Iš~Hª#j|fH
Displays error code
(see "Additional Error Code
Information").
To cancel
+ +
;
+
:
Cancels error code
Pressure zero-point offset
To view
+
To cancel
+ +
;
/
:
Lock
To lock
hold
;
+
:
(for five seconds)
r6
Settings can be viewed but
not changed.
To unlock hold
;
+
:
(for five seconds)
1TTYdY_^Q\CgYdSX@QbQ]UdUb9^V_b]QdY_^
—The following parameters can be set
individually for each of the four switches. Access the first parameter by pushing both keys for that
switch at the same time. Access subsequent parameters by releasing the keys and pushing them again.
Switchpoint parameter: Standard or Window. The differences are explained under "Choosing
Switchpoint Parameters".
Delay time parameter: Delay time works as a switch damping element. This is useful when unstable
pressures cause the switches to operate in an unstable manner. Delay time is adjustable from 0 - 10
seconds in steps of 16ms. Delay time is displayed in seconds.
Relay function parameter: HLFS (High Level Fail Safe) or LLFS (Low Level Fail Safe)
HLFS = Switch ON, the potential free contacts are closed.
LLFS = Switch ON, potential free contacts open.
S1
OFF
S2
OFF
S1
OFF
S2
OFF
S2
ON
S3
ON
S3
ON
S4
ON
S3
ON
S4
ON
S3
OFF
S4
OFF
S3
OFF
S4
OFF
8?GD85D@!& 'hh@B5CCG?B;C =CC= )$'15)&#(1F'!
25