Milnor 76032, Service Manual, Page: 22 / 122

Understanding the Tag Guidelines for the Models Listed Below
PELLERIN MILNOR CORPORATION
Most tags contain only symbols (no words). A few are worded. The explanations below, start
with the tag part number (displayed on the tag). If a tag contains no words, the meaning of the tag
is explained below. If the tag contains words, the explanation below simply repeats the wording.
Display or Action Explanation
Read the manual before proceeding. This symbol appears on
most tags. The machine ships with a complete set of manuals.
The safety, installation, and electrical schematic manuals are
particularly important to installers.
B2TAG88005: This carefully built product was tested and
inspected to meet Milnor
®
performance and quality standards by
B2TAG94078: Do not forklift here; do not jack here; do not step
here—whichever applies.
B2TAG94081: Motor must rotate in this direction. On single
motor washer-extractors and centrifugal extractors, the drive
motor must turn in this direction during draining and extraction.
This tag is usually wrapped around a motor housing. If the motor
turns in the opposite direction when the machine is first tested,
the electrical hookup is incorrect and must be reversed as
explained in the schematic manual.
B2TAG94082: Maintain a 25 millimeter (1") minimum
clearance between level float clips. Set low level so that the
bottom of the float is always at least 25 millimeters (1") above
the bottom of the float tube.
B2TAG94084: Do not lift from one corner of the machine, as
this can cause the frame to rack, damaging it.
18