Milnor 6458, Installation Manual

Page: 67 / 93

Pellerin Milnor Corporation
Figure 1. Blower Shipping Restraint Figure 2. Reconnect Blower Contactor Coil Wires
2.3. Electric Power Connection Capacities
BNDUUI01.C12 0000243297 A.7 A.3 1/2/20 1:40 PM Released
The customer must furnish a remotely mounted disconnect switch with lag type fuses or circuit
breakers, and wiring between this box and the fuse box on the machine. Refer to the machine
nameplate and the external fuse and wire document for your machine to determine the sizes of
these fuses or circuit breakers, and wires.
2.4. Control Connections
BNDUUI01.C13 0000243296 A.7 A.3 1/2/20 1:40 PM Released
Refer to the layout drawings for your laundering system.
3. Bumper Guard Installation
BNDUUI01.C14 0000243322 A.7 A.3 1/2/20 1:40 PM In Work
The machine is supplied with bumper guards which must be installed on the rear of the machine
when the machine is on site. The guards protect the machine from the constant impact of laundry
carts placed under the discharge door. Hence the height at which the guards are installed must
match the height of the carts used. See
Figure 3 .
Utility Requirements For Gas, Steam and Thermal Oil Dryers
63