OM-212296 Page 17
5-8.
Connection Of 115 VAC Flux Hopper Without Plug
Ref. 803 629-A
!
Turn Off welding power
source and weld control and
disconnect input power be-
fore opening access door.
1
Access Door
Remove securing screw and open
access door.
2
Terminal Block TB2
3
Access Hole - Used For
Connections To Terminal
Blocks, Flux Valve, etc.
.
Install strain relief (customer
supplied) in access hole.
Strip 1/4 in (6 mm) insulation off end
of leads. Insert four-conductor
cables from flux system through ac-
cess hole, and make connections
as shown.
Close and secure access door.
Tools Needed:
Four-Conductor Cable
From Flux System
2
Green Lead
White Lead
Black Lead
Red Lead
Four-Conductor Cable
From Flux System
1
3
