OM-212296 Page 10
SECTION 4 − SPECIFICATIONS
4-1.
Description
This weld control is designed to au-
tomatically cycle welding events.
This unit can be used with constant
voltage, AC or DC welding power
sources. Relay contacts that work
in conjunction with the weld cycle
are available to interface with other
equipment (such as fixtures and
flux valves). See Section 5-5 and
5-7 for connection information on
TB2.
For information on the wire drive as-
sembly, see Owner’s Manual sup-
plied with the assembly.
803 448-A
4-2.
Serial Number And Rating Label Location
The serial number and rating information for this product is located on the side
. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
4-3.
Specifications
Specification
Description
Type Of Input Power From Welding
Power Source
Single-Phase 115 Volts AC, 10 Amperes, 50/60 Hertz
Welding Power Source Type
Constant Voltage (CV), AC Or DC
Welding Processes
Submerged Arc (SAW) Welding
Overall Dimensions Including Knobs,
Receptacles, Etc.
Weld Control — Height: 11.5 in. (292 mm); Width: 12.5 in. (318 mm); Depth: 7 in. (178 mm)
Weight
Weld Control — Net: 25.5 lb (11.6 kg)
Weld Voltage And Amperage
Capacity (AC Or DC)
0 To 100 Volts
0 To 1500 Amperes
