OM-267043 Page 36
Table 9-1. Drive Roll
.
Base Selection Of Drive Rolls Upon The Following Recommended Usages:
1. V-Grooved Rolls For Hard Wire.
2. U-Grooved Rolls For Soft And Soft Shelled Cored Wires.
3. U-Cogged Rolls For Extremely Soft Shelled Wires (Usually Hard Surfacing Types).
4. V-Knurled Rolls For Hard Shelled Cored Wires.
5. Drive Roll Types May Be Mixed To Suit Particular Requirements (Example: V-Knurled Roll In Combination With U-Grooved).
Wire Diameter
Drive Roll (2 Required)
Fraction
Decimal
Metric
Part No.
Type
0.023
−
0.025 in.
0.023
−
0.025 in.
0.6 mm
087130
V
−
Grooved
0.030 in.
0.030 in.
0.8 mm
053695
V
−
Grooved
0.035 in.
0.035 in.
0.9 mm
053700
V
−
Grooved
0.040 in.
0.040 in.
1.0 mm
053696
V
−
Grooved
0.045 in.
0.045 in.
1.2 mm
053697
V
−
Grooved
0.052 in.
0.052 in.
1.3 mm
053698
V
−
Grooved
1/16 in.
0.062 in.
1.6 mm
053699
V
−
Grooved
0.035 in.
0.035 in.
0.9 mm
072000
U
−
Grooved
0.045 in.
0.045 in.
1.2 mm
053701
U
−
Grooved
0.052 in.
0.052 in.
1.3 mm
053702
U
−
Grooved
1/16 in.
0.062 in.
1.6 mm
053706
U
−
Grooved
5/64 in.
0.079 in.
2.0 mm
053704
U
−
Grooved
0.035 in.
0.035 in.
0.9 mm
132958
V
−
Knurled
0.045 in.
0.045 in.
1.2 mm
132957
V
−
Knurled
0.052 in.
0.052 in.
1.3 mm
132956
V
−
Knurled
1/16 in.
0.062 in.
1.6 mm
132955
V
−
Knurled
0.068
−
0.072 in.
0.068
−
0.072 in.
1.8 mm
132959
V
−
Knurled
0.079 in.
0.079 in.
2.0 mm
132960
V
−
Knurled
0.045 in.
0.045 in.
1.2 mm
083489
U
−
Cogged
0.052 in.
0.052 in.
1.3 mm
083490
U
−
Cogged
1/16 in.
0.062 in.
1.6 mm
053708
U
−
Cogged
5/64 in.
0.079 in.
2.0 mm
053710
U
−
Cogged
S-0859
