G6060 / G6070 Ag-Baggers
Dealer Pre-Delivery Check List
After the Bagger has been completely set-up, the following inspections Must be made before delivery to
the customer. Check off each item after prescribed action is taken.
No parts of the unit have been damaged in
shipment. Check for such things as dents, loose or
missing parts and scratches: touch up or replace
components as required.
Wheels are properly attached and tires are
properly inflated:
LT 235 / 85R16 @ 80 PSI
LT 265 / 75R16 @ 80 PSI
All bolts and fasteners are in place and tightly
secured.
As applicable, the cylinders, hoses and fittings
are NOT damaged, leaking or loosely connected.
The gearbox oil is filled to proper level.
Hydraulic oil reservoir is filled to proper level.
Make sure conveyor slides properly, grease if
necessary.
All grease fittings have been properly lubricated
and drive chains oiled; see lubrication chapter in the
owner’s manual.
All guards, shields and decals are in place and
securely attached.
Make sure hitch fits properly in both the transport
and operating positions.
All chains are properly tightened:
Conveyor drive and driven chain
Rotor drive chain
Hydraulic pump drive chain
All drive & driven sprockets aligned properly:
Conveyor drive chain sprockets
Rotor drive chain sprockets
Hydraulic pump drive chain sprockets
Brake system properly tightens and releases.
Clean brake rotor before delivery.
Install bungee cord on tunnel & bag pan.
Install backstop hook assembly
–
see operator’s
manual.
String backstop
–
see operator’s manual
Bag boom works properly (If so equipped)
Hook the Bagger to the appropriate RPM tractor and test run while checking that proper operation
is exhibited by all components.
Check that:
Transport lights work properly.
PTO Shield turns freely.
All drives and mechanisms are operating
smoothly and properly adjusted.
All hydraulic system components are
functioning properly.
I acknowledge that pre-delivery was performed on this unit as outlined.
___________________________________
___________________________________
Dealership’s Name
Dealer Representative’s Name
Date
___________________________________
___________________________________
Customer’s Signature
Delivery Date
___________________________________
Model Number
Serial Number
(Dealer Copy)
