54
WARNING
DO NOT operate the bagger unless all guards are secured in place. Moving
parts inside could cause serious injury or death.
f. If the long conveyor chain is still loose, adjust the upper drive shaft as follows:
1.
Open the conveyor drive chain guard at the top of the conveyor.
2.
Loosen the idler on the conveyor drive chain.
3.
Loosen the bearing mounting bolts (2 on each side of conveyor).
4.
Loosen the jam nuts on the adjuster bolts on each side of the conveyor.
5.
Using the adjuster bolts, adjust the long conveyor chain evenly on both sides.
6.
After the correct tension is reached, tighten the jam nuts securely.
7.
Tighten the bearing mounting bolts securely to hold the bearings in place.
8.
Adjust the conveyor drive chain and tighten the idler bolt securely.
9.
Lower the drive chain guard and secure in place before operating the bagger.
Idler Sprocket
Conveyor Drive
Chain
Retainer Bolts
Hex Nuts
Adjusting Bolts
Retainer Bolts
Under Drive
Chain Guard
Adjustment On Tunnel
Side Of Conveyor
