![Miller AG-BAG G6060 Operator'S Manual Download Page 25](http://html1.mh-extra.com/html/miller/ag-bag-g6060/ag-bag-g6060_operators-manual_1796046025.webp)
19
Set The Backstop In Position
WARNING
Backstop is heavy. Use care when moving backstop.
1.
Place the bagger where the bag will begin.
2.
Release the cable drum brake pressure by opening the needle valve and the hand pump
valve.
3.
Unhook the backstop slings from the cables. Be sure to unhook both slings.
4.
Remove the bolts holding the backstop to the support feet. Use the bag boom to lift the back-
stop off the support feet. This step may not be necessary depending on how backstop has
been transported.
Hand Pump
Needle Valve
Backstop Sling
Hook
Cable
Support Feet (Bolts
Already Removed)
Pump Valve