Miller Electric MOG-200C, Owner'S Manual

Page: 7 / 24

OM-805 Page 1
SECTION 1 – SAFETY INFORMATION
mod1.1 2/93
Read all safety messages throughout this manual.
Obey all safety messages to avoid injury.
Learn the meaning of WARNING and CAUTION.
1 Safety Alert Symbol
2 Signal Word
WARNING means possible death
or serious injury can happen.
CAUTION means possible minor
injury or equipment damage can
happen.
3 Statement Of Hazard And Re-
sult
4 Safety Instructions To Avoid
Hazard
5 Hazard Symbol (If Available)
6 Safety Banner
Read safety blocks for each sym-
bol shown.
7 NOTE
Special instructions for best oper-
ation – not related to safety.
2
NOTE
ELECTRIC SHOCK can kill.
•
Do not touch live electrical parts.
•
Disconnect input power before
installing or servicing.
WARNING
READ SAFETY BLOCKS at start of
Section 3-1 before proceeding.
WARNING
5
4
6
7
1 2
CAUTION
MOVING PARTS can injure.
•
Keep away from moving parts.
•
Keep all panels and covers closed
when operating.
3
Turn Off switch when using high frequency.
Figure 1-1. Safety Information
SECTION 2 – SPECIFICATIONS
Table 2-1. Resistance Grid
Specification Description
Weld Amperage Adjustment Coarse: 50 Ampere Steps; Fine: 5 Ampere Steps; Optional: 2-1/2 Ampere*
Overall Dimensions Height: 12 in (305 mm); Width: 10 in (254 mm); Length: 28 in (711 mm)
Rated Welding Amperes Output 195 Amperes At 25 VDC, 100% Duty Cycle
Weight Net: 35 lb (16 kg); Ship: 39 lb (18 kg)
*Units with Polarity switch include a 2-1/2 Ampere switch.
SECTION 3 – INSTALLATION
3-1. Typical Multiple Operator System Component Relationships
WARNING
ELECTRIC SHOCK can kill; TWO TIMES NORMAL OPEN-CIRCUIT VOLTS exists between elec-
trode holders of opposite polarity.
•
Do not touch live electrical parts.
•
Do not touch electrode holders of opposite polarity at the same time.
•
Separate electrode holders of opposite polarity to prevent contact.
•
Consult ANSI Z49.1 for common grounding safe practices.